Norway
Duty free*
- Their lines2 Norwegian lines
87.08.5010 For the vehicles of heading 87.01
Norwegian tariff data checked Sept. 13, 2026.
Customs code · HS subheading 8708 50
Final code reached
This is a complete 8-digit customs code. Exports and Intrastat use it as it is. For an import into the EU, pick a 10-digit line below.
This code covers drive axles with a differential, including axles with other transmission parts, carrier axles and parts of these axles. They must be for industrial assembly of the specified passenger-oriented vehicles, goods vehicles with the stated engine limits, or special-purpose motor vehicles.
For example
Official tariff text
Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for the industrial assembly of: pedestrian-controlled tractors, motor cars and vehicles principally designed for the transport of persons, vehicles for the transport of goods with compression-ignition internal combustion piston engine "diesel or semi-diesel engine" <= 2500 cm³ or with spark-ignition internal piston engine <= 2800 cm³, special purpose motor vehicles of heading 8705, n.e.s
You are seeing what applies when you export from the EU. Switch above if you import.
You are seeing what applies when you import into the EU. Switch above if you export.
Your answer for export
You do not pick a 10-digit EU import line for an export declaration or Intrastat. The destination classifies the goods under its own tariff.
8 digits, ready
Selling to Norway, Great Britain and the United States
Norway, Great Britain and the United States use their own tariff lines under the 6-digit HS code. The rates below are what their customs charge on goods arriving from the EU. Match the goods against each country's own wording before you rely on a rate.
Norway
Duty free*
87.08.5010 For the vehicles of heading 87.01
Norwegian tariff data checked Sept. 13, 2026.
Great Britain
From 0.0% to 2.0%*
8708 50 20 15 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive
Northern Ireland follows other rules.
UK tariff data checked Sept. 13, 2026.
United States
15.0%†
Estimated from published US measures
8708.50.11.10 Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles
The US importer of record files the entry.
US tariff data checked Sept. 16, 2026.
Norway splits the 6-digit category its own way, so these are Norway's own lines under it, not this EU code. Check your product against their wording; what Norwegian customs charges is shown per line.
87.08.5010
For the vehicles of heading 87.01
87.08.5090
Other
Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.
What UK customs charges when goods like these arrive in Great Britain.
8708 50 20 15
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened
8708 50 20 18
Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1,4 m or more but not more than 2,4 m, for use in the production of goods of Chapter 87
8708 50 20 20
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
8708 50 20 25
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened
8708 50 20 35
Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
8708 50 20 50
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
8708 50 20 55
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened
8708 50 20 70
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
8708 50 20 75
Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
8708 50 20 80
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 20 90
Other
These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.
Contains public sector information licensed under the Open Government Licence v3.0.
Source: UK Department for Business and Trade (data.api.trade.gov.uk).
What US customs charges when goods like these arrive from the EU. The US importer of record files the entry and pays the duty.
8708.50.11.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For tractors suitable for agricultural use, Drive axles with differential, whether or not provided with other transmission components
8708.50.11.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For tractors suitable for agricultural use, Non-driving axles
8708.50.31.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For other tractors, Drive axles with differential, whether or not provided with other transmission components
8708.50.31.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For other tractors, Non-driving axles
8708.50.51.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For vehicles of heading 8703, Drive axles with differential, whether or not provided with other transmission components
8708.50.51.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For vehicles of heading 8703, Non-driving axles
8708.50.61.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For other vehicles, Drive axles with differential, whether or not provided with other transmission components
8708.50.65.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For other vehicles, Non-driving axles
8708.50.70.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For tractors (except road tractors), For tractors suitable for agricultural use
8708.50.75.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For tractors (except road tractors), For other tractors
8708.50.79.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Parts of non-driving axles
8708.50.81.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Other, Of cast iron
8708.50.85.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Other, Half-shafts
8708.50.89.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Other
8708.50.91.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Parts of non-driving axles, Spindles
8708.50.91.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Parts of non-driving axles, Other
8708.50.93.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Other, Of cast iron
8708.50.95.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Other, Half-shafts
8708.50.99.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Other
Anti-dumping and countervailing duties, US import taxes and customs fees are not included.
The descriptions above are the US tariff texts, which the United States publishes in English only.
Source: the US International Trade Commission's Harmonized Tariff Schedule (hts.usitc.gov), public domain, and the measures published in the Federal Register.
This is a planning estimate from the US Harmonized Tariff Schedule (revision shown) and the published Federal Register measures as of the date shown, for a shipment of EU origin. It is not a customs entry, legal advice or a broker's opinion, and tariffs.help is not a US-licensed customs broker. The US importer of record or their broker confirms the classification, origin, value and the duty due before filing.
Before you use the code
The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.
On an EU import declaration
11 import lines
When these goods are imported into the EU, the declaration needs a 10-digit code. Under 8708 50 20 the EU tariff has 11 lines, each with its own wording.
You or your customs agent pick the line whose wording fits the goods; the last line, "Other", covers what none of the specific wordings describe.
Some lines depend on what the goods will be used for and need customs authorisation; matching the wording alone does not give a lower rate.
8708 50 20 15
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened
Duty suspension: 0%*
8708 50 20 18
Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1,4 m or more but not more than 2,4 m, for use in the production of goods of Chapter 87
Duty suspension: 0% under an end-use authorisation*
Conditions apply, customs authorisation needed.
8708 50 20 20
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
Duty suspension: 0%*
8708 50 20 25
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened
Duty suspension: 0%*
8708 50 20 35
Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
Duty suspension: 0%*
8708 50 20 50
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
Duty suspension: 0% under an end-use authorisation*
Conditions apply, customs authorisation needed.
8708 50 20 55
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened
Duty suspension: 0%*
8708 50 20 70
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
Duty suspension: 0%*
8708 50 20 75
Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
Duty suspension: 0%*
8708 50 20 80
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 20 90
Other
No import line matches that search.
A suspension is a lower rate the EU grants for specific products; whether your goods qualify depends on the line's wording and conditions.
Exports from the EU and Intrastat normally use the 8-digit code as it is.
EU tariff data of Sept. 13, 2026.
Rates, origin and documents
Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.
Data of Sept. 1, 2026
Trade-defence measures, such as anti-dumping duty, may apply to goods originating in:
This is recorded on a more detailed code below this one, so it may not cover your goods. See the import lines under this code
Check this code in the official EU TARIC databasePreferential rates exist for goods originating in:
These rates apply to Economic Partnership Agreements; CARIFORUM except Haiti; GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms); OCTs (Overseas Countries and Territories); GSP - General arrangements except India; GSP+ (incentive arrangement for sustainable development and good governance).
Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC databaseImport restrictions are recorded for goods originating in:
The EU records document conditions on this code. What customs may ask for depends on where the goods come from, exactly what the product is and the customs procedure.
Proof of origin 2 conditions
If you claim a lower rate for goods from a country the EU has a trade agreement with, customs asks for proof of origin, for example a EUR.1 certificate or an origin declaration.
Sanctions and restricted regions 16 conditions
Some conditions come from EU sanctions rules. They matter when the goods are linked to a country or region the EU restricts trade with.
Product controls and permits 2 conditions
Depending on the exact product, customs may ask for a licence, a permit or a control certificate before the goods are released.
Statements that the goods are outside a rule's scope 3 conditions
Some conditions are statements that a rule does not cover the goods, for example that the product is not on a controlled list.
Other conditions 5 conditions
These conditions match none of the groups above. Whether customs asks for one depends on the goods, where they come from and the customs procedure.
One last classification check
Use this view if you are still unsure the code describes the product precisely.
Compare the sibling codes at this level before you settle on this one.
Worth comparing
Codes that sit close to this one, for when the material itself could be different.
That code covers the listed drive axles and carrier axles for tractors, passenger vehicles and special-purpose vehicles, except for industrial assembly of the specified vehicles covered here.
That code covers parts of drive axles or carrier axles made of drop-forged steel, whereas this code covers axles and parts for industrial assembly of the specified vehicles.
That code covers certain parts of drive axles, excluding parts for industrial assembly of the specified vehicles, carrier axles and drop-forged steel parts.
Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with Toldstyrelsen, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.
Create a free account to keep the customs codes you care about in one place, and come back to them whenever you need them.