Customs code · HS subheading 8207 19

Final code reached

Interchangeable mining or earth-drilling tools with a diamond or agglomerated-diamond working part

This is a complete 8-digit customs code. Exports and Intrastat use it as it is. For an import into the EU the declaration uses 8207 19 10 00: this code with 00 added.

This covers interchangeable tools used for mining or earth drilling when the working part is made of diamond or agglomerated diamond. The tool must be for mining or earth drilling, not general-purpose drilling.

For example

An interchangeable diamond drill bit for earth drilling
An interchangeable agglomerated-diamond drilling tool for mining

See the official tariff text

Official tariff text

Rock-drilling or earth-boring tools, interchangeable, with working parts of diamond or agglomerated diamond

You are seeing what applies when you export from the EU. Switch above if you import.

You are seeing what applies when you import into the EU. Switch above if you export.

Your answer for export

The full EU export code is 8207 19 10.

You do not pick a 10-digit EU import line for an export declaration or Intrastat. The destination classifies the goods under its own tariff.

8 digits, ready

Selling to Norway, Great Britain and the United States

What they charge on arrival.

Norway, Great Britain and the United States use their own tariff lines under the 6-digit HS code. The rates below are what their customs charge on goods arriving from the EU. Match the goods against each country's own wording before you rely on a rate.

Norway

Duty free

Their lines2 Norwegian lines

82.07.1901 Rock drilling bits of diamond

Norwegian tariff data checked Sept. 13, 2026.

Great Britain

Duty free

Their lines1 British line

8207 19 10 00 With working part of diamond or agglomerated diamond

Northern Ireland follows other rules.

UK tariff data checked Sept. 13, 2026.

United States

10.0%

Estimated from published US measures

Their lines7 US lines
Entry dateSept. 17, 2026

8207.19.30.30 Interchangeable tools for handtools, whether or not power operated

The US importer of record files the entry.

US tariff data checked Sept. 16, 2026.

See the 2 Norwegian lines

Selling to Norway

Norway splits the 6-digit category its own way, so these are Norway's own lines under it, not this EU code. Check your product against their wording; what Norwegian customs charges is shown per line.

82.07.1901

Rock drilling bits of diamond

Ordinary duty

Duty free
82.07.1909

Other

Ordinary duty

Duty free

Norwegian tariff data version 1.5/1.2, last checked Sept. 13, 2026.

Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.

See the 1 British line

Selling to Great Britain

What UK customs charges when goods like these arrive in Great Britain.

8207 19 10 00

With working part of diamond or agglomerated diamond

Ordinary duty

Duty free

These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.

UK tariff data version v4.0.1599, last checked Sept. 13, 2026.

Contains public sector information licensed under the Open Government Licence v3.0.

Source: UK Department for Business and Trade (data.api.trade.gov.uk).

See the 7 US lines

Selling to the United States

What US customs charges when goods like these arrive from the EU. The US importer of record files the entry and pays the duty.

8207.19.30.30

Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof, Rock drilling or earth boring tools, and parts thereof, Other, including parts, With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium, Percussion rock drill bits

General rate

5%

From the EU

10.0% Estimated from published US measures US headings applied: 9903.05.39 Section 301 forced-labour action, 91 FR 47318 (memorandum 91 FR 47717), U.S. note 52 to subchapter III of chapter 99
8207.19.30.60

Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof, Rock drilling or earth boring tools, and parts thereof, Other, including parts, With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium, Other, Rotary rock drill bits, core bits and reamers

General rate

5%

From the EU

10.0% Estimated from published US measures US headings applied: 9903.05.39 Section 301 forced-labour action, 91 FR 47318 (memorandum 91 FR 47717), U.S. note 52 to subchapter III of chapter 99
8207.19.30.90

Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof, Rock drilling or earth boring tools, and parts thereof, Other, including parts, With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium, Other

General rate

5%

From the EU

10.0% Estimated from published US measures US headings applied: 9903.05.39 Section 301 forced-labour action, 91 FR 47318 (memorandum 91 FR 47717), U.S. note 52 to subchapter III of chapter 99
8207.19.60.30

Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof, Rock drilling or earth boring tools, and parts thereof, Other, including parts, Other, Percussion rock drill bits

General rate

2.9%

From the EU

10.0% Estimated from published US measures US headings applied: 9903.05.39 Section 301 forced-labour action, 91 FR 47318 (memorandum 91 FR 47717), U.S. note 52 to subchapter III of chapter 99
8207.19.60.65

Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof, Rock drilling or earth boring tools, and parts thereof, Other, including parts, Other, Rotary rock drill bits, core bits and reamers, With working part of diamonds

General rate

2.9%

From the EU

10.0% Estimated from published US measures US headings applied: 9903.05.39 Section 301 forced-labour action, 91 FR 47318 (memorandum 91 FR 47717), U.S. note 52 to subchapter III of chapter 99
8207.19.60.70

Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof, Rock drilling or earth boring tools, and parts thereof, Other, including parts, Other, Rotary rock drill bits, core bits and reamers, Other

General rate

2.9%

From the EU

10.0% Estimated from published US measures US headings applied: 9903.05.39 Section 301 forced-labour action, 91 FR 47318 (memorandum 91 FR 47717), U.S. note 52 to subchapter III of chapter 99
8207.19.60.90

Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof, Rock drilling or earth boring tools, and parts thereof, Other, including parts, Other

General rate

2.9%

From the EU

10.0% Estimated from published US measures US headings applied: 9903.05.39 Section 301 forced-labour action, 91 FR 47318 (memorandum 91 FR 47717), U.S. note 52 to subchapter III of chapter 99

Worked out for an entry on Sept. 17, 2026.

US tariff schedule 2026HTSRev19, last checked Sept. 16, 2026.

Last change we recorded: Revision 19 (2026), Sept. 16, 2026.

Anti-dumping and countervailing duties, US import taxes and customs fees are not included.

The descriptions above are the US tariff texts, which the United States publishes in English only.

Source: the US International Trade Commission's Harmonized Tariff Schedule (hts.usitc.gov), public domain, and the measures published in the Federal Register.

This is a planning estimate from the US Harmonized Tariff Schedule (revision shown) and the published Federal Register measures as of the date shown, for a shipment of EU origin. It is not a customs entry, legal advice or a broker's opinion, and tariffs.help is not a US-licensed customs broker. The US importer of record or their broker confirms the classification, origin, value and the duty due before filing.

Before you use the code

Check the facts that sit outside the code

The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.

Classify your own product, free Look up the current rates and rules

The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with Toldstyrelsen or TARIC.

What to do now for an import

The code is settled. What is left is the import declaration around it.

On an import declaration the code is 8207 19 10 00: this code with 00 added There is no further split under it. Go to this section
State the country of origin: it decides the rate, sanctions and documents The same code can be charged and treated differently depending on where the goods were made.
Check today's requirements in TARIC Rates, quotas and document requirements change. The EU's own database is the current source. Open the EU TARIC database

Check it before you file This is a suggestion, please verify it against your own product.

On an import declaration

8207 19 10 00

When these goods are imported into the EU, the declaration uses the 10-digit form 8207191000: this code with 00 added. There is no further split under it.

Duty suspension: 0% for ships, boats and drilling platforms

Conditions apply, customs authorisation needed.

Look this line up in the EU tariff

A suspension is a lower rate the EU grants for specific products; whether your goods qualify depends on the line's wording and conditions.

Exports from the EU and Intrastat normally use the 8-digit code as it is.

EU tariff data of Sept. 13, 2026.

Rates, origin and documents

Read the signals first. Open only the ones you want to check.

Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.

Data of Sept. 1, 2026

Lower duty for goods from some countries

Possible

Preferential rates exist for goods originating in:

Andorra
San Marino
Türkiye
European Union
Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe
Botswana, Eswatini, Lesotho, Mozambique and Namibia
Western Sahara
European Union, Iceland, Liechtenstein and Norway
+45 origins

These rates apply to Economic Partnership Agreements; CARIFORUM except Haiti; GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms); GSP+ (incentive arrangement for sustainable development and good governance); OCTs (Overseas Countries and Territories); GSP - General arrangements except India.

Whether you can use one depends on the origin rules for the goods and on the documentation you can show.

Check this code in the official EU TARIC database

Restrictions and paperwork

Important

Import restrictions are recorded for goods originating in:

Ukraine
Belarus
Russian Federation

The EU records document conditions on this code. What customs may ask for depends on where the goods come from, exactly what the product is and the customs procedure.

Proof of origin 2 conditions

If you claim a lower rate for goods from a country the EU has a trade agreement with, customs asks for proof of origin, for example a EUR.1 certificate or an origin declaration.

Show the EU's own wording for these conditions

Movement certificate EUR.1
Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document

Sanctions and restricted regions 10 conditions

Some conditions come from EU sanctions rules. They matter when the goods are linked to a country or region the EU restricts trade with.

Show the EU's own wording for these conditions

Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 4)
The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 3)
Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 8f of Regulation (EU) No 765/2006)
Import authorisation by virtue of article 1ra paragraph 10 of Council Regulation (EU) 765/2006
Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3aa)
Import authorisation by virtue of article 3i paragraph 3c of Council Regulation (EU) 833/2014
Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014

Check this code in the official EU TARIC database

EU tariff measure data of Sept. 1, 2026.

One last classification check

Check the path and the nearest alternatives.

Use this view if you are still unsure the code describes the product precisely.

How we got to this code

XV
82
8207
8207 19
8207 19 10

Show the steps

The path to this code

Every level is settled. Open an earlier step if you need to change a choice.

Step 5 of 5 · Complete

Step 1 · Section XV Base metals and articles of base metal
Is it iron or steel; an article made of iron or steel; copper or an article made of copper; nickel or an article made of nickel; aluminium or an article made of aluminium; lead or an article made of lead; zinc or an article made of zinc; tin or an article made of tin; another base metal, sintered metal or cermet, or an article made from one of these; a base-metal tool, implement, knife, spoon or fork, or a part thereof; or another miscellaneous article made of base metal?
✓
Step 2 · Chapter 82 Tools, implements, cutlery, spoons and forks, of ba… 10 of 11 chapters in section XV
Which named product group best describes it: an agricultural, gardening or forestry hand tool; a hand saw or saw blade; a file, pliers or similar hand tool; a hand wrench or socket head; another hand tool or implement; a retail set of tools; a replaceable tool; a machine knife or blade; an unmounted sintered metal-carbide tool part; a mechanical hand-operated food or drink implement weighing less than 10 kg; a knife; a razor or non-electric shaving machine; scissors; another cutting or clipping tool or manicure or pedicure implement; or a spoon, fork or similar kitchen or table article?
✓
Step 3 · Heading 8207 Tools, interchangeable, for hand tools, whether or … 7 of 15 headings under chapter 82
What is the interchangeable tool's named use: rock or earth drilling, metal wire drawing or extrusion, pressing, stamping or piercing, thread cutting, drilling, boring, milling or turning—or is it another tool for a hand tool or machine tool; and, for rock or earth drilling tools, is the working part made of sintered metal carbides or cermets, or of other materials?
✓
Step 4 · Subheading 8207 19 Rock-drilling or earth-boring tools, interchangeabl… 2 of 10 subheadings under heading 8207
Is the working part made of diamond or agglomerated diamond, or is it made of another material?
✓
Step 5 · Full code 8207 19 10 Rock-drilling or earth-boring tools, interchangeabl… 1 of 2 codes under subheading 8207 19

Compare with the codes next to it.

Compare the sibling codes at this level before you settle on this one.

you are here 8207 19 10 Rock-drilling or earth-boring tools, interchangeable, with working parts of diamond or agglomerated diamond 2.7%
another option 8207 19 90 Rock-drilling or earth-boring tools, interchangeable, with working parts of materials other than sintered metal carbide, cermets, diamond or agglomerated diamond 2.7%

Worth comparing

Codes that sit close to this one, for when the material itself could be different.

Browse chapter 82

Often confused with

8205 10 00 Hand-operated drilling, threading or tapping hand tools 1.7%
That code covers boring and threading tools for use by hand, whereas this code covers interchangeable tools for mining or earth drilling.
8207 19 90 Rock-drilling or earth-boring tools, interchangeable, with working parts of materials other than sintered metal carbide, cermets, diamond or agglomerated diamond 2.7%
That code covers interchangeable mining or earth-drilling tools whose working part is made of materials other than diamond or agglomerated diamond, whereas this code names diamond or agglomerated diamond.
8209 00 20 Inserts, indexable, for tools, unmounted, of sintered metal carbide or cermets 2.7%
That code covers unmounted inserts made of sintered metal carbides or cermets, whereas this code covers complete interchangeable mining or earth-drilling tools with a diamond or agglomerated-diamond working part.

Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with Toldstyrelsen, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.