Norway
Duty free*
- Their lines2 Norwegian lines
76.06.1210 Corrugated plates and sheets
Norwegian tariff data checked Sept. 13, 2026.
Customs code · HS subheading 7606 12
Final code reached
Rectangular or square aluminium-alloy sheet or strip for drink-can ends
Lids or rings, thicker than 0.2 mm
This is a complete 8-digit customs code. Exports and Intrastat use it as it is. For an import into the EU the declaration uses 7606 12 19 00: this code with 00 added.
This code covers aluminium-alloy sheet or strip used as material for drink-can ends, including lids, and rings. The material must be thicker than 0.2 mm and have a rectangular or square form.
See the official tariff text
Official tariff text
Beverage can end stock and tab stock, of aluminium alloys, of a thickness of > 0,2 mm
You are seeing what applies when you export from the EU. Switch above if you import.
You are seeing what applies when you import into the EU. Switch above if you export.
Your answer for export
The full EU export code is 7606 12 19.
You do not pick a 10-digit EU import line for an export declaration or Intrastat. The destination classifies the goods under its own tariff.
8 digits, ready
Selling to Norway, Great Britain and the United States
What they charge on arrival.
Norway, Great Britain and the United States use their own tariff lines under the 6-digit HS code. The rates below are what their customs charge on goods arriving from the EU. Match the goods against each country's own wording before you rely on a rate.
Great Britain
6.0%*
- Their lines1 British line
- EU originDuty free*
7606 12 19 00 Beverage can end stock and tab stock
Northern Ireland follows other rules.
UK tariff data checked Sept. 13, 2026.
United States
From 53.0% to 56.5%†
Estimated from published US measures
- Their lines8 US lines
- Entry dateSept. 17, 2026
7606.12.30.15 Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, Rectangular
The US importer of record files the entry.
US tariff data checked Sept. 16, 2026.
See the 2 Norwegian lines
Selling to Norway
Norway splits the 6-digit category its own way, so these are Norway's own lines under it, not this EU code. Check your product against their wording; what Norwegian customs charges is shown per line.
-
76.06.1210
Corrugated plates and sheets
- Ordinary duty
- Duty free*
-
76.06.1290
Other
- Ordinary duty
- Duty free*
Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.
See the 1 British line
Selling to Great Britain
What UK customs charges when goods like these arrive in Great Britain.
-
7606 12 19 00
Beverage can end stock and tab stock
- Ordinary duty
- 6.0%*
- Goods of EU origin
- Duty free* You need documentation of EU preferential origin to use this rate.
These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.
Contains public sector information licensed under the Open Government Licence v3.0.
Source: UK Department for Business and Trade (data.api.trade.gov.uk).
See the 8 US lines
Selling to the United States
What US customs charges when goods like these arrive from the EU. The US importer of record files the entry and pays the duty.
-
7606.12.30.15
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, Rectangular (including square), Of aluminum alloys, Not clad, With a thickness of more than 6.3 mm, High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter
- General rate
- 3%
- From the EU
- 53.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
-
7606.12.30.25
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, Rectangular (including square), Of aluminum alloys, Not clad, With a thickness of more than 6.3 mm, Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter
- General rate
- 3%
- From the EU
- 53.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
-
7606.12.30.35
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, Rectangular (including square), Of aluminum alloys, Not clad, With a thickness of more than 6.3 mm, Other
- General rate
- 3%
- From the EU
- 53.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
-
7606.12.30.45
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, Rectangular (including square), Of aluminum alloys, Not clad, With a thickness of 6.3 mm or less, Aluminum can stock, Body stock
- General rate
- 3%
- From the EU
- 53.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
-
7606.12.30.55
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, Rectangular (including square), Of aluminum alloys, Not clad, With a thickness of 6.3 mm or less, Aluminum can stock, Lid stock
- General rate
- 3%
- From the EU
- 53.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
-
7606.12.30.91
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, Rectangular (including square), Of aluminum alloys, Not clad, With a thickness of 6.3 mm or less, Other, Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter
- General rate
- 3%
- From the EU
- 53.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
-
7606.12.30.96
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, Rectangular (including square), Of aluminum alloys, Not clad, With a thickness of 6.3 mm or less, Other
- General rate
- 3%
- From the EU
- 53.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
-
7606.12.60.00
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, Rectangular (including square), Of aluminum alloys, Clad
- General rate
- 6.5%
- From the EU
- 56.5%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
Anti-dumping and countervailing duties, US import taxes and customs fees are not included.
The descriptions above are the US tariff texts, which the United States publishes in English only.
Source: the US International Trade Commission's Harmonized Tariff Schedule (hts.usitc.gov), public domain, and the measures published in the Federal Register.
This is a planning estimate from the US Harmonized Tariff Schedule (revision shown) and the published Federal Register measures as of the date shown, for a shipment of EU origin. It is not a customs entry, legal advice or a broker's opinion, and tariffs.help is not a US-licensed customs broker. The US importer of record or their broker confirms the classification, origin, value and the duty due before filing.
Before you use the code
Check the facts that sit outside the code
The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.
- The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
- Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
- Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with Toldstyrelsen or TARIC.
On an import declaration
7606 12 19 00
When these goods are imported into the EU, the declaration uses the 10-digit form 7606121900: this code with 00 added. There is no further split under it.
Exports from the EU and Intrastat normally use the 8-digit code as it is.
EU tariff data of Sept. 13, 2026.
Rates, origin and documents
Read the signals first. Open only the ones you want to check.
Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.
Data of Sept. 1, 2026
Lower duty for goods from some countries
Possible
Preferential rates exist for goods originating in:
- Andorra
- San Marino
- Türkiye
- European Union
- Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe
- Botswana, Eswatini, Lesotho, Mozambique and Namibia
- Western Sahara
- European Union, Iceland, Liechtenstein and Norway
- +45 origins
These rates apply to Economic Partnership Agreements; CARIFORUM except Haiti; GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms); OCTs (Overseas Countries and Territories); GSP - General arrangements except India; GSP+ (incentive arrangement for sustainable development and good governance).
Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC database
A limited quantity at a lower rate
Check
A tariff quota is recorded for this code. This does not say whether any of the quota is still available. It covers goods originating in:
- United Kingdom
Restrictions and paperwork
Important
Import restrictions are recorded for goods originating in:
- Ukraine
- North Korea (Democratic People’s Republic of Korea)
- Belarus
- China
- India
- Russian Federation
- any country except Ceuta, Iceland, Liechtenstein, Melilla, Norway and Switzerland
The EU records document conditions on this code. What customs may ask for depends on where the goods come from, exactly what the product is and the customs procedure.
Proof of origin 2 conditions
If you claim a lower rate for goods from a country the EU has a trade agreement with, customs asks for proof of origin, for example a EUR.1 certificate or an origin declaration.
Show the EU's own wording for these conditions
- Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
- Movement certificate EUR.1
Sanctions and restricted regions 11 conditions
Some conditions come from EU sanctions rules. They matter when the goods are linked to a country or region the EU restricts trade with.
Show the EU's own wording for these conditions
- Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
- Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
- Goods other than those described in the MG footnotes linked to the measure (Annex II, Part V of Reg. (EU) 2017/1509)
- The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 4)
- The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 3)
- Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 8f of Regulation (EU) No 765/2006)
- Import authorisation by virtue of article 1ra paragraph 10 of Council Regulation (EU) 765/2006
- The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3aa)
- Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014
- Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
- Import authorisation by virtue of article 3i paragraph 3c of Council Regulation (EU) 833/2014
Product controls and permits 4 conditions
Depending on the exact product, customs may ask for a licence, a permit or a control certificate before the goods are released.
Show the EU's own wording for these conditions
- Application to obtain the status of authorised CBAM declarant has been submitted until 31 March 2026
- Goods of EU origin (CBAM)
- Goods originating in Büsingen, Heligoland, or Livigno (Article 2.4 of Regulation (EU) 2023/956)
- CBAM account number
Statements that the goods are outside a rule's scope 3 conditions
Some conditions are statements that a rule does not cover the goods, for example that the product is not on a controlled list.
Show the EU's own wording for these conditions
- Goods other than those described in the footnotes linked to the measure
- De minimis exemption - Exemption by virtue Article 2a. of Regulation (EU) 2023/956
- Goods to be moved or used in the context of military activities - Exemption by virtue Article 2.(3) of Regulation (EU) 2023/956
These goods are monitored
Recorded
Imports under this code are counted and reported. This applies to goods originating in:
- any country except Iceland, Liechtenstein and Norway
This does not restrict the goods, but customs records them.
Check this code in the official EU TARIC databaseOne last classification check
Check the path and the nearest alternatives.
Use this view if you are still unsure the code describes the product precisely.
Show the steps
Compare with the codes next to it.
Compare the sibling codes at this level before you settle on this one.
- another option 7606 12 11 Beverage can body stock, of aluminium alloys, of a thickness of > 0,2 mm 7.5%*
-
you are here 7606 12 19 Beverage can end stock and tab stock, of aluminium alloys, of a thickness of > 0,2 mm 7.5%*
- another option 7606 12 30 Aluminium Composite Panel, of aluminium alloys, of a thickness of > 0,2 mm 7.5%*
- another option 7606 12 50 Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular, painted, varnished or coated with plastics (excl. beverage can body stock, end stock and tab stock, and Aluminium Composite Panel) 7.5%*
- another option 7606 12 92 Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. painted, varnished or coated with plastics, expanded plates, sheets and strip, beverage can body stock, end stock and tab stock) 7.5%*
- another option 7606 12 93 Plates, sheets and strip, of aluminium alloys, of a thickness of >= 3 mm but < 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics) 7.5%*
- another option 7606 12 99 Plates, sheets and strip, of aluminium alloys, of a thickness of >= 6 mm, square or rectangular (excl. such products painted, varnished or coated with plastics) 7.5%*
Worth comparing
Codes that sit close to this one, for when the material itself could be different.
Similar products elsewhere in the tariff
- 7601 20 30 Unwrought aluminium alloys in the form of slabs 6.0%*
- 7601 20 40 Unwrought aluminium alloys in the form of billets 6.0%*
- 7616 99 90 Articles of aluminium, uncast, n.e.s. 6.0%*
- 7601 20 80 Unwrought aluminium alloys (excl. slabs and billets) 6.0%*
- 7601 10 10 Aluminium slabs, not alloyed, unwrought 3.0%*
Often confused with
-
7606 12 11
Beverage can body stock, of aluminium alloys, of a thickness of > 0,2 mm
7.5%*
That code names material for drink-can bodies, while this code names material for drink-can ends, lids and rings.
-
7606 12 50
Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm, square or rectangular, painted, varnished or coated with plastics (excl. beverage can body stock, end stock and tab stock, and Aluminium Composite Panel)
7.5%*
That code covers painted, lacquered or plastic-coated sheet and strip and excludes drink-can bodies, ends and rings; this code specifically covers material for drink-can ends, lids and rings.
-
7606 12 92
Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm but < 3 mm, square or rectangular (excl. painted, varnished or coated with plastics, expanded plates, sheets and strip, beverage can body stock, end stock and tab stock)
7.5%*
That code covers other rectangular or square sheet and strip thicker than 0.2 mm but less than 3 mm and excludes drink-can bodies, ends and rings; this code names material for drink-can ends, lids and rings.
Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with Toldstyrelsen, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.
Save codes to your own collection
Create a free account to keep the customs codes you care about in one place, and come back to them whenever you need them.