Customs code · HS subheading 7320 90

Final code reached

Other iron and steel springs, excluding named special types

This is a complete 8-digit customs code. Exports and Intrastat use it as it is. For an import into the EU, pick a 10-digit line below.

This code covers iron and steel springs that are not flat spiral springs, disc springs, screw springs, leaf springs or leaves for them, clock springs or spring washers. Shock absorbers and torsion bars covered under section 17 are also excluded.

For example

An iron and steel spring that is not one of the named excluded types

See the official tariff text

Official tariff text

Springs and leaves for springs, of iron or steel (excl. discs springs, flat spiral springs, helical springs, leaf-springs and leaves therefor, clock and watch springs, springs for sticks and handles of umbrellas or parasols, and shock absorbers and torque rod or torsion bar springs of Section 17)

You are seeing what applies when you export from the EU. Switch above if you import.

You are seeing what applies when you import into the EU. Switch above if you export.

Your answer for export

The full EU export code is 7320 90 90.

You do not pick a 10-digit EU import line for an export declaration or Intrastat. The destination classifies the goods under its own tariff.

8 digits, ready

Selling to Norway, Great Britain and the United States

What they charge on arrival.

Norway, Great Britain and the United States use their own tariff lines under the 6-digit HS code. The rates below are what their customs charge on goods arriving from the EU. Match the goods against each country's own wording before you rely on a rate.

Norway

Duty free

Their lines1 Norwegian line

73.20.9000 Other

Norwegian tariff data checked Sept. 13, 2026.

Great Britain

Duty free

Their lines2 British lines

7320 90 90 10 For use in certain types of aircraft

Northern Ireland follows other rules.

UK tariff data checked Sept. 13, 2026.

United States

From 50.0% to 52.9%

Estimated from published US measures

Their lines4 US lines
Entry dateSept. 17, 2026

7320.90.10.00 Springs and leaves for springs, of iron or steel, Other, Hairsprings

The US importer of record files the entry.

US tariff data checked Sept. 16, 2026.

See the 1 Norwegian line

Selling to Norway

Norway splits the 6-digit category its own way, so these are Norway's own lines under it, not this EU code. Check your product against their wording; what Norwegian customs charges is shown per line.

73.20.9000

Other

Ordinary duty

Duty free

Norwegian tariff data version 1.5/1.2, last checked Sept. 13, 2026.

Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.

See the 2 British lines

Selling to Great Britain

What UK customs charges when goods like these arrive in Great Britain.

All 2 UK lines under this code

They all have the same duty rates shown here.

Ordinary duty

Duty free

These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.

UK tariff data version v4.0.1599, last checked Sept. 13, 2026.

Contains public sector information licensed under the Open Government Licence v3.0.

Source: UK Department for Business and Trade (data.api.trade.gov.uk).

See the 4 US lines

Selling to the United States

What US customs charges when goods like these arrive from the EU. The US importer of record files the entry and pays the duty.

7320.90.10.00

Springs and leaves for springs, of iron or steel, Other, Hairsprings

General rate

Free

From the EU

50.0% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
7320.90.50.10

Springs and leaves for springs, of iron or steel, Other, Of wire, Suitable for use in mattress supports and mattresses of heading 9404

General rate

2.9%

From the EU

52.9% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
7320.90.50.20

Springs and leaves for springs, of iron or steel, Other, Of wire, Other

General rate

2.9%

From the EU

52.9% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
7320.90.50.60

Springs and leaves for springs, of iron or steel, Other

General rate

2.9%

From the EU

52.9% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

Worked out for an entry on Sept. 17, 2026.

US tariff schedule 2026HTSRev19, last checked Sept. 16, 2026.

Last change we recorded: Revision 19 (2026), Sept. 16, 2026.

Anti-dumping and countervailing duties, US import taxes and customs fees are not included.

The descriptions above are the US tariff texts, which the United States publishes in English only.

Source: the US International Trade Commission's Harmonized Tariff Schedule (hts.usitc.gov), public domain, and the measures published in the Federal Register.

This is a planning estimate from the US Harmonized Tariff Schedule (revision shown) and the published Federal Register measures as of the date shown, for a shipment of EU origin. It is not a customs entry, legal advice or a broker's opinion, and tariffs.help is not a US-licensed customs broker. The US importer of record or their broker confirms the classification, origin, value and the duty due before filing.

Before you use the code

Check the facts that sit outside the code

The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.

Classify your own product, free Look up the current rates and rules

The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with Toldstyrelsen or TARIC.

What to do now for an import

The code is settled. What is left is the import declaration around it.

Choose the 10-digit import line Find the EU wording that matches the goods, and read the whole line before you pick it. 2 options Go to this section
State the country of origin: it decides the rate, sanctions and documents The same code can be charged and treated differently depending on where the goods were made.
Check today's requirements in TARIC Rates, quotas and document requirements change. The EU's own database is the current source. Open the EU TARIC database

Check it before you file This is a suggestion, please verify it against your own product.

On an EU import declaration

Pick the 10-digit line that matches the goods.

2 import lines

When these goods are imported into the EU, the declaration needs a 10-digit code. Under 7320 90 90 the EU tariff has 2 lines, each with its own wording.

You or your customs agent pick the line whose wording fits the goods; the last line, "Other", covers what none of the specific wordings describe.

Some lines depend on what the goods will be used for and need customs authorisation; matching the wording alone does not give a lower rate.

Match the whole wording A line is its own wording plus the grouping text above it. Read both before you settle on one.
Check the intended use On some lines the lower rate belongs to what the goods will be used for, not to the goods alone.
Confirm the authorisation Where the lower rate carries conditions, customs asks for an authorisation before it can be used.

7320 90 90 10

For use in certain types of aircraft

2.7%

Duty suspension: 0% under an end-use authorisation

Conditions apply, customs authorisation needed.

This line in the EU tariff Rulings on this line
7320 90 90 90

Other

2.7%

Duty suspension: 0% for ships, boats and drilling platforms

Conditions apply, customs authorisation needed.

This line in the EU tariff Rulings on this line

A suspension is a lower rate the EU grants for specific products; whether your goods qualify depends on the line's wording and conditions.

Exports from the EU and Intrastat normally use the 8-digit code as it is.

EU tariff data of Sept. 13, 2026.

Rates, origin and documents

Read the signals first. Open only the ones you want to check.

Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.

Data of Sept. 1, 2026

Lower duty for goods from some countries

Possible

Preferential rates exist for goods originating in:

Andorra
Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe
Botswana, Eswatini, Lesotho, Mozambique and Namibia
Western Sahara
European Union, Iceland, Liechtenstein and Norway
Costa Rica, El Salvador, Guatemala, Honduras, Nicaragua and Panama
Ivory Coast
Chile
+46 origins

These rates apply to Economic Partnership Agreements; CARIFORUM except Haiti; GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms); GSP+ (incentive arrangement for sustainable development and good governance); GSP - General arrangements except India; OCTs (Overseas Countries and Territories).

Whether you can use one depends on the origin rules for the goods and on the documentation you can show.

Check this code in the official EU TARIC database

Restrictions and paperwork

Important

Import restrictions are recorded for goods originating in:

Belarus
Ukraine
any country except Russian Federation
Russian Federation

The EU records document conditions on this code. What customs may ask for depends on where the goods come from, exactly what the product is and the customs procedure.

Proof of origin 2 conditions

If you claim a lower rate for goods from a country the EU has a trade agreement with, customs asks for proof of origin, for example a EUR.1 certificate or an origin declaration.

Show the EU's own wording for these conditions

Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
Movement certificate EUR.1

Sanctions and restricted regions 6 conditions

Some conditions come from EU sanctions rules. They matter when the goods are linked to a country or region the EU restricts trade with.

Show the EU's own wording for these conditions

Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
The product is imported from a partner country for importation of iron and steel as listed in Annex XXXVI to Regulation (EU) No 833/2014
Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
Import authorisation by virtue of article 3g.7 of Council Regulation (EU) 833/2014
Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014

Other conditions 1 condition

These conditions match none of the groups above. Whether customs asks for one depends on the goods, where they come from and the customs procedure.

Show the EU's own wording for this condition

Evidence of the country of origin of the iron and steel inputs used for processing of the product in a third country

Check this code in the official EU TARIC database

EU tariff measure data of Sept. 1, 2026.

One last classification check

Check the path and the nearest alternatives.

Use this view if you are still unsure the code describes the product precisely.

How we got to this code

XV
73
7320
7320 90
7320 90 90

Show the steps

The path to this code

Every level is settled. Open an earlier step if you need to change a choice.

Step 5 of 5 · Complete

Step 1 · Section XV Base metals and articles of base metal
Is it iron or steel; an article made of iron or steel; copper or an article made of copper; nickel or an article made of nickel; aluminium or an article made of aluminium; lead or an article made of lead; zinc or an article made of zinc; tin or an article made of tin; another base metal, sintered metal or cermet, or an article made from one of these; a base-metal tool, implement, knife, spoon or fork, or a part thereof; or another miscellaneous article made of base metal?
✓
Step 2 · Chapter 73 Articles of iron or steel 2 of 11 chapters in section XV
Which named product group best describes the iron or steel item—for example, a pipe, structure, container, chain, household item or fastener?
✓
Step 3 · Heading 7320 Springs and leaves for springs, of iron or steel (e… 20 of 26 headings under chapter 73
Is it a leaf spring or a spring leaf, a coil spring, or another spring or spring leaf including a flat spiral spring?
✓
Step 4 · Subheading 7320 90 Springs and leaves for springs, of iron or steel, i… 3 of 3 subheadings under heading 7320
Is it a leaf spring or leaf, a coil spring, a flat spiral spring, a disc spring, or another iron or steel spring or spring leaf that is not a clock spring, spring washer, shock absorber or torsion bar?
✓
Step 5 · Full code 7320 90 90 Springs and leaves for springs, of iron or steel (e… 3 of 3 codes under subheading 7320 90

Compare with the codes next to it.

Compare the sibling codes at this level before you settle on this one.

another option 7320 90 10 Flat spiral springs, of iron or steel 2.7%
another option 7320 90 30 Discs springs, of iron or steel 2.7%
you are here 7320 90 90 Springs and leaves for springs, of iron or steel (excl. discs springs, flat spiral springs, helical springs, leaf-springs and leaves therefor, clock and watch springs, springs for sticks and handles of umbrellas or parasols, and shock absorbers and torque rod or torsion bar springs of Section 17) 2.7%

Worth comparing

Codes that sit close to this one, for when the material itself could be different.

Browse chapter 73

Often confused with

7318 21 00 Spring washers and other lock washers, of iron or steel 3.7%
That code covers spring washers, which are excluded from this code.
7320 90 10 Flat spiral springs, of iron or steel 2.7%
That code specifically covers flat spiral springs, while this code excludes them.
7320 90 30 Discs springs, of iron or steel 2.7%
That code specifically covers disc springs, while this code excludes them.

Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with Toldstyrelsen, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.