tariffs.help
Log in Create free account

Customs code · HS subheading 7228 30

Final code reached

Large-diameter circular bars of non-stainless alloy steel

Only hot-rolled, hot-drawn or hot-extruded

This is a complete 8-digit customs code. Exports and Intrastat use it as it is. For an import into the EU the declaration uses 7228 30 61 00: this code with 00 added.

This code covers bars of alloy steel other than stainless steel that have a circular cross-section with a diameter of at least 80 mm and have only been hot-rolled, hot-drawn or hot-extruded. It excludes high-speed steel, silicon-manganese steel, tool steel and the specifically described steel covered by code 7228 30 41.

For example

  • A circular hot-rolled bar of non-stainless alloy steel with a diameter of 80 mm, not made of high-speed steel, silicon-manganese steel or tool steel and not covered by code 7228 30 41
  • A circular hot-drawn bar of non-stainless alloy steel with a diameter greater than 80 mm, not made of high-speed steel, silicon-manganese steel or tool steel and not covered by code 7228 30 41
See the official tariff text

Official tariff text

Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of >= 80 mm (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)

You are seeing what applies when you export from the EU. Switch above if you import.

You are seeing what applies when you import into the EU. Switch above if you export.

Your answer for export

The full EU export code is 7228 30 61.

You do not pick a 10-digit EU import line for an export declaration or Intrastat. The destination classifies the goods under its own tariff.

8 digits, ready

Selling to Norway, Great Britain and the United States

What they charge on arrival.

Norway, Great Britain and the United States use their own tariff lines under the 6-digit HS code. The rates below are what their customs charge on goods arriving from the EU. Match the goods against each country's own wording before you rely on a rate.

Norway

Duty free

  • Their lines1 Norwegian line

72.28.3000 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded

Norwegian tariff data checked Sept. 13, 2026.

Great Britain

Duty free

  • Their lines1 British line

7228 30 61 00 80|mm or more

Northern Ireland follows other rules.

UK tariff data checked Sept. 13, 2026.

United States

50.0%

Estimated from published US measures

  • Their lines9 US lines
  • Entry dateSept. 17, 2026

7228.30.20.00 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy

The US importer of record files the entry.

US tariff data checked Sept. 16, 2026.

See the 1 Norwegian line

Selling to Norway

Norway splits the 6-digit category its own way, so these are Norway's own lines under it, not this EU code. Check your product against their wording; what Norwegian customs charges is shown per line.

  • 72.28.3000

    Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded

    Ordinary duty
    Duty free

Norwegian tariff data version 1.5/1.2, last checked Sept. 13, 2026.

Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.

See the 1 British line

Selling to Great Britain

What UK customs charges when goods like these arrive in Great Britain.

  • 7228 30 61 00

    80|mm or more

    Ordinary duty
    Duty free

These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.

UK tariff data version v4.0.1599, last checked Sept. 13, 2026.

Contains public sector information licensed under the Open Government Licence v3.0.

Source: UK Department for Business and Trade (data.api.trade.gov.uk).

See the 9 US lines

Selling to the United States

What US customs charges when goods like these arrive from the EU. The US importer of record files the entry and pays the duty.

  • 7228.30.20.00

    Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel, Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Of tool steel (other than high-speed steel), Of ball-bearing steel

    General rate
    Free
    From the EU
    50.0% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7228.30.40.00

    Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel, Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Of tool steel (other than high-speed steel), Of chipper knife steel, not cold-formed

    General rate
    Free
    From the EU
    50.0% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7228.30.60.00

    Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel, Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Of tool steel (other than high-speed steel), Other

    General rate
    Free
    From the EU
    50.0% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7228.30.80.05

    Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel, Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Other, Of high-nickel alloy steel

    General rate
    Free
    From the EU
    50.0% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7228.30.80.10

    Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel, Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Other, Concrete reinforcing bars and rods

    General rate
    Free
    From the EU
    50.0% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7228.30.80.15

    Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel, Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Other, With a diameter or cross section measuring less than 76 mm

    General rate
    Free
    From the EU
    50.0% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7228.30.80.41

    Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel, Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Other, With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm

    General rate
    Free
    From the EU
    50.0% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

  • 7228.30.80.45

    Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel, Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Other, With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm

    General rate
    Free
    From the EU
    50.0% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
Show all 9 lines

  • 7228.30.80.70

    Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel, Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded, Other, With a diameter or cross section exceeding 228 mm

    General rate
    Free
    From the EU
    50.0% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

Worked out for an entry on Sept. 17, 2026.

US tariff schedule 2026HTSRev19, last checked Sept. 16, 2026.

Last change we recorded: Revision 19 (2026), Sept. 16, 2026.

Anti-dumping and countervailing duties, US import taxes and customs fees are not included.

The descriptions above are the US tariff texts, which the United States publishes in English only.

Source: the US International Trade Commission's Harmonized Tariff Schedule (hts.usitc.gov), public domain, and the measures published in the Federal Register.

This is a planning estimate from the US Harmonized Tariff Schedule (revision shown) and the published Federal Register measures as of the date shown, for a shipment of EU origin. It is not a customs entry, legal advice or a broker's opinion, and tariffs.help is not a US-licensed customs broker. The US importer of record or their broker confirms the classification, origin, value and the duty due before filing.

Before you use the code

Check the facts that sit outside the code

The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.

Classify your own product, free Look up the current rates and rules
  1. The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
  2. Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
  3. Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with Toldstyrelsen or TARIC.

On an import declaration

7228 30 61 00

When these goods are imported into the EU, the declaration uses the 10-digit form 7228306100: this code with 00 added. There is no further split under it.

Look this line up in the EU tariff

Exports from the EU and Intrastat normally use the 8-digit code as it is.

EU tariff data of Sept. 13, 2026.

Rates, origin and documents

Read the signals first. Open only the ones you want to check.

Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.

Data of Sept. 1, 2026

Extra duty on goods from some countries

First

Trade-defence measures, such as anti-dumping duty, may apply to goods originating in:

  • China
  • any country except China

The duty depends on the producer or exporter, so two shipments of the same goods can be charged differently.

This is recorded on a more detailed code below this one, so it may not cover your goods.

Check this code in the official EU TARIC database

Lower duty for goods from some countries

Possible

Preferential rates exist for goods originating in:

  • Andorra
  • Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe
  • Botswana, Eswatini, Lesotho, Mozambique and Namibia
  • Western Sahara
  • Ivory Coast
  • Cameroon
  • Egypt
  • Fiji
  • +16 origins

These rates apply to Economic Partnership Agreements; CARIFORUM except Haiti; GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms).

Whether you can use one depends on the origin rules for the goods and on the documentation you can show.

Check this code in the official EU TARIC database

A limited quantity at a lower rate

Check

A tariff quota is recorded for this code. This does not say whether any of the quota is still available. It covers goods originating in:

  • any country except China, Iceland, Korea, Republic of (South Korea), Liechtenstein, North Macedonia, Norway, Switzerland, Türkiye and United Kingdom
  • Brazil
  • Switzerland
  • China
  • Egypt
  • European Union
  • United Kingdom
  • Korea, Republic of (South Korea)
  • +2 origins

The quota applies to FTA partners except Brazil, Egypt, Korea, Republic of (South Korea), North Macedonia, Switzerland, Türkiye and United Kingdom.

Check this code in the official EU TARIC database

Restrictions and paperwork

Important

Import restrictions are recorded for goods originating in:

  • Belarus
  • Ukraine
  • any country except Ceuta, Iceland, Liechtenstein, Melilla, Norway and Switzerland
  • North Korea (Democratic People’s Republic of Korea)
  • any country except Iran, Islamic Republic of
  • Iran, Islamic Republic of

The EU records document conditions on this code. What customs may ask for depends on where the goods come from, exactly what the product is and the customs procedure.

Proof of origin 2 conditions

If you claim a lower rate for goods from a country the EU has a trade agreement with, customs asks for proof of origin, for example a EUR.1 certificate or an origin declaration.

Show the EU's own wording for these conditions
  • Movement certificate EUR.1
  • Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document

Sanctions and restricted regions 6 conditions

Some conditions come from EU sanctions rules. They matter when the goods are linked to a country or region the EU restricts trade with.

Show the EU's own wording for these conditions
  • Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
  • Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
  • Goods other than those described in the footnotes linked to the measure (Reg 267/2012)
  • Goods not consigned from Iran
  • Import authorisation for restricted goods and technologies (Council Regulation (EU) No 267/2012)
  • The declared goods are not concerned by Council Regulation (EC) No. 267/2012, Annex II

Product controls and permits 4 conditions

Depending on the exact product, customs may ask for a licence, a permit or a control certificate before the goods are released.

Show the EU's own wording for these conditions
  • Goods of EU origin (CBAM)
  • Goods originating in Büsingen, Heligoland, or Livigno (Article 2.4 of Regulation (EU) 2023/956)
  • CBAM account number
  • Application to obtain the status of authorised CBAM declarant has been submitted until 31 March 2026

Statements that the goods are outside a rule's scope 3 conditions

Some conditions are statements that a rule does not cover the goods, for example that the product is not on a controlled list.

Show the EU's own wording for these conditions
  • Goods to be moved or used in the context of military activities - Exemption by virtue Article 2.(3) of Regulation (EU) 2023/956
  • De minimis exemption - Exemption by virtue Article 2a. of Regulation (EU) 2023/956
  • Goods other than those described in the footnotes linked to the measure
Check this code in the official EU TARIC database

EU tariff measure data of Sept. 1, 2026.

One last classification check

Check the path and the nearest alternatives.

Use this view if you are still unsure the code describes the product precisely.

How we got to this code

  1. XV
  2. 72
  3. 7228
  4. 7228 30
  5. 7228 30 61
Show the steps

Compare with the codes next to it.

Compare the sibling codes at this level before you settle on this one.

Worth comparing

Codes that sit close to this one, for when the material itself could be different.

Browse chapter 72

Similar products elsewhere in the tariff

Often confused with

Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with Toldstyrelsen, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.