Norway
Duty free*
- Their lines1 Norwegian line
72.19.1300 Of a thickness of 3 mm or more but less than 4.75 mm
Norwegian tariff data checked Sept. 13, 2026.
Customs code · HS subheading 7219 13
Final code reached
Hot-rolled stainless steel flat products
At least 600 mm wide, in coils, 3 mm or more but under 4.75 mm thick, with nickel content of at least 2.5% by weight
This is a complete 8-digit customs code. Exports and Intrastat use it as it is. For an import into the EU, pick a 10-digit line below.
This code covers hot-rolled stainless steel flat products that are at least 600 mm wide and supplied in coils. They must be 3 mm or more but under 4.75 mm thick and have a nickel content of at least 2.5% by weight.
For example
- A hot-rolled stainless steel flat product in coil form, 600 mm wide, 3 mm thick, with nickel content of 2.5% by weight
- A hot-rolled stainless steel coil, 1,200 mm wide, 4 mm thick, with nickel content of 3% by weight
See the official tariff text
Official tariff text
Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm but <= 4,75 mm, containing by weight >= 2,5 nickel
You are seeing what applies when you export from the EU. Switch above if you import.
You are seeing what applies when you import into the EU. Switch above if you export.
Your answer for export
The full EU export code is 7219 13 10.
You do not pick a 10-digit EU import line for an export declaration or Intrastat. The destination classifies the goods under its own tariff.
8 digits, ready
Selling to Norway, Great Britain and the United States
What they charge on arrival.
Norway, Great Britain and the United States use their own tariff lines under the 6-digit HS code. The rates below are what their customs charge on goods arriving from the EU. Match the goods against each country's own wording before you rely on a rate.
Great Britain
Duty free*
- Their lines2 British lines
7219 13 10 10 Consigned from Türkiye
Northern Ireland follows other rules.
UK tariff data checked Sept. 13, 2026.
United States
50.0%†
Estimated from published US measures
- Their lines5 US lines
- Entry dateSept. 18, 2026
7219.13.00.02 Flat-rolled products of stainless steel, of a width of 600 mm or more, Not further worked
The US importer of record files the entry.
US tariff data checked Sept. 16, 2026.
See the 1 Norwegian line
Selling to Norway
Norway splits the 6-digit category its own way, so these are Norway's own lines under it, not this EU code. Check your product against their wording; what Norwegian customs charges is shown per line.
-
72.19.1300
Of a thickness of 3 mm or more but less than 4.75 mm
- Ordinary duty
- Duty free*
Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.
See the 2 British lines
Selling to Great Britain
What UK customs charges when goods like these arrive in Great Britain.
-
All 2 UK lines under this code
They all have the same duty rates shown here.
- Ordinary duty
- Duty free*
These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.
Contains public sector information licensed under the Open Government Licence v3.0.
Source: UK Department for Business and Trade (data.api.trade.gov.uk).
See the 5 US lines
Selling to the United States
What US customs charges when goods like these arrive from the EU. The US importer of record files the entry and pays the duty.
-
7219.13.00.02
Flat-rolled products of stainless steel, of a width of 600 mm or more, Not further worked than hot-rolled, in coils, Of a thickness of 3 mm or more but less than 4.75 mm, Not annealed or not pickled
- General rate
- Free
- From the EU
- 50.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
-
7219.13.00.31
Flat-rolled products of stainless steel, of a width of 600 mm or more, Not further worked than hot-rolled, in coils, Of a thickness of 3 mm or more but less than 4.75 mm, Other, Of a width of 1370 mm or more
- General rate
- Free
- From the EU
- 50.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
-
7219.13.00.51
Flat-rolled products of stainless steel, of a width of 600 mm or more, Not further worked than hot-rolled, in coils, Of a thickness of 3 mm or more but less than 4.75 mm, Other, Containing more than 0.5 percent but less than 24 percent by weight of nickel, Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
- General rate
- Free
- From the EU
- 50.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
-
7219.13.00.71
Flat-rolled products of stainless steel, of a width of 600 mm or more, Not further worked than hot-rolled, in coils, Of a thickness of 3 mm or more but less than 4.75 mm, Other, Containing more than 0.5 percent but less than 24 percent by weight of nickel, Other
- General rate
- Free
- From the EU
- 50.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
-
7219.13.00.81
Flat-rolled products of stainless steel, of a width of 600 mm or more, Not further worked than hot-rolled, in coils, Of a thickness of 3 mm or more but less than 4.75 mm, Other
- General rate
- Free
- From the EU
- 50.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
Anti-dumping and countervailing duties, US import taxes and customs fees are not included.
The descriptions above are the US tariff texts, which the United States publishes in English only.
Source: the US International Trade Commission's Harmonized Tariff Schedule (hts.usitc.gov), public domain, and the measures published in the Federal Register.
This is a planning estimate from the US Harmonized Tariff Schedule (revision shown) and the published Federal Register measures as of the date shown, for a shipment of EU origin. It is not a customs entry, legal advice or a broker's opinion, and tariffs.help is not a US-licensed customs broker. The US importer of record or their broker confirms the classification, origin, value and the duty due before filing.
Before you use the code
Check the facts that sit outside the code
The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.
- The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
- Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
- Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with Toldstyrelsen or TARIC.
On an EU import declaration
Pick the 10-digit line that matches the goods.
2 import lines
When these goods are imported into the EU, the declaration needs a 10-digit code. Under 7219 13 10 the EU tariff has 2 lines, each with its own wording.
You or your customs agent pick the line whose wording fits the goods; the last line, "Other", covers what none of the specific wordings describe.
The standard duty rate is the same on every line.
- Match the whole wording A line is its own wording plus the grouping text above it. Read both before you settle on one.
-
7219 13 10 10
Consigned from Türkiye
-
7219 13 10 90
Other
No import line matches that search.
Exports from the EU and Intrastat normally use the 8-digit code as it is.
EU tariff data of Sept. 13, 2026.
Rates, origin and documents
Read the signals first. Open only the ones you want to check.
Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.
Data of Sept. 1, 2026
Extra duty on goods from some countries
First
Trade-defence measures, such as anti-dumping duty, may apply to goods originating in:
- China
- Indonesia
- Taiwan
- any country except China, Indonesia and Taiwan
- Türkiye
Lower duty for goods from some countries
Possible
Preferential rates exist for goods originating in:
- Andorra
- Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe
- Botswana, Eswatini, Lesotho, Mozambique and Namibia
- Western Sahara
- Ivory Coast
- Cameroon
- Egypt
- Fiji
- +16 origins
These rates apply to Economic Partnership Agreements; CARIFORUM except Haiti; GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms).
Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC database
A limited quantity at a lower rate
Check
A tariff quota is recorded for this code. This does not say whether any of the quota is still available. It covers goods originating in:
- China
- European Union
- Indonesia
- India
- Korea, Republic of (South Korea)
- Türkiye
- Taiwan
- South Africa
Restrictions and paperwork
Important
Import restrictions are recorded for goods originating in:
- Belarus
- Ukraine
- North Korea (Democratic People’s Republic of Korea)
- any country except Russian Federation
- Russian Federation
- any country except Ceuta, Iceland, Liechtenstein, Melilla, Norway and Switzerland
- Iran, Islamic Republic of
- any country except Iran, Islamic Republic of
The EU records document conditions on this code. What customs may ask for depends on where the goods come from, exactly what the product is and the customs procedure.
Proof of origin 2 conditions
If you claim a lower rate for goods from a country the EU has a trade agreement with, customs asks for proof of origin, for example a EUR.1 certificate or an origin declaration.
Show the EU's own wording for these conditions
- Movement certificate EUR.1
- Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
Sanctions and restricted regions 13 conditions
Some conditions come from EU sanctions rules. They matter when the goods are linked to a country or region the EU restricts trade with.
Show the EU's own wording for these conditions
- Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
- Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
- Goods other than those described in the MG footnotes linked to the measure (Annex II, Part VIII of Reg. (EU) 2017/1509)
- Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
- Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014
- Import authorisation by virtue of article 3g.7 of Council Regulation (EU) 833/2014
- The product is imported from a partner country for importation of iron and steel as listed in Annex XXXVI to Regulation (EU) No 833/2014
- Goods other than those described in the MG footnotes linked to the measure (Annex II, Part VI of Reg. (EU) 2017/1509)
- Goods other than those described in the MG footnotes linked to the measure (Missile Technology Control Regime list - Annex III of Reg. (EU) 267/2012)
- Goods not consigned from Iran
- Import authorisation for restricted goods and technologies (Council Regulation (EU) No 267/2012)
- Goods other than those described in the footnotes linked to the measure (Reg 267/2012)
- The declared goods are not concerned by Council Regulation (EC) No. 267/2012, Annex II
Product controls and permits 4 conditions
Depending on the exact product, customs may ask for a licence, a permit or a control certificate before the goods are released.
Show the EU's own wording for these conditions
- Goods originating in Büsingen, Heligoland, or Livigno (Article 2.4 of Regulation (EU) 2023/956)
- CBAM account number
- Application to obtain the status of authorised CBAM declarant has been submitted until 31 March 2026
- Goods of EU origin (CBAM)
Statements that the goods are outside a rule's scope 3 conditions
Some conditions are statements that a rule does not cover the goods, for example that the product is not on a controlled list.
Show the EU's own wording for these conditions
- Goods to be moved or used in the context of military activities - Exemption by virtue Article 2.(3) of Regulation (EU) 2023/956
- De minimis exemption - Exemption by virtue Article 2a. of Regulation (EU) 2023/956
- Goods other than those described in the footnotes linked to the measure
Other conditions 1 condition
These conditions match none of the groups above. Whether customs asks for one depends on the goods, where they come from and the customs procedure.
Show the EU's own wording for this condition
- Evidence of the country of origin of the iron and steel inputs used for processing of the product in a third country
One last classification check
Check the path and the nearest alternatives.
Use this view if you are still unsure the code describes the product precisely.
Show the steps
Compare with the codes next to it.
Compare the sibling codes at this level before you settle on this one.
-
you are here 7219 13 10 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm but <= 4,75 mm, containing by weight >= 2,5 nickel Duty free*
- another option 7219 13 90 Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm but <= 4,75 mm, containing by weight < 2,5 nickel Duty free*
Worth comparing
Codes that sit close to this one, for when the material itself could be different.
Similar products elsewhere in the tariff
- 7220 20 41 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight >= 2,5% nickel Duty free*
- 7220 20 49 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight < 2,5% nickel Duty free*
- 7220 20 81 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of <= 0,35 mm and containing by weight >= 2,5% nickel Duty free*
- 7220 20 21 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm and containing by weight >= 2,5% nickel Duty free*
- 7220 20 29 Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm and containing by weight < 2,5% nickel Duty free*
Often confused with
-
7219 13 90
Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm but <= 4,75 mm, containing by weight < 2,5 nickel
Duty free*
This code is for the same type of hot-rolled coiled product, but with nickel content of less than 2.5% by weight.
-
7220 20 21
Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm and containing by weight >= 2,5% nickel
Duty free*
That code covers products under 600 mm wide and cold-rolled, whereas this code covers products at least 600 mm wide and only hot-rolled.
-
7220 20 41
Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight >= 2,5% nickel
Duty free*
That code covers products under 600 mm wide and cold-rolled, with thickness over 0.35 mm but under 3 mm; this code covers products at least 600 mm wide and 3 mm or more but under 4.75 mm thick.
Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with Toldstyrelsen, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.
Save codes to your own collection
Create a free account to keep the customs codes you care about in one place, and come back to them whenever you need them.