Code 7211 13 · Heading 7211

Uncoated hot-rolled universal steel, over 150 mm but under 600 mm wide, at least 4 mm thick, not coiled

This covers flat-rolled products of iron or non-alloy steel that are only hot-rolled, unplated, uncoated and unpainted, rolled on four faces or in a closed groove. They must be over 150 mm but under 600 mm wide, at least 4 mm thick, not coiled, and have no relief pattern.

For example

A non-coiled, uncoated hot-rolled universal steel product of non-alloy steel, 200 mm wide and 4 mm thick, rolled on four faces and without a relief pattern

See the official tariff text

Official tariff text

Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats"

How we got to this code

XV
72
7211
7211 13

Show the steps

The path to this code

Every code is reached through these choices, one level at a time.

Step 4 of 4

Step 1 · Section XV Base metals and articles of base metal
Is it iron or steel; an article made of iron or steel; copper or an article made of copper; nickel or an article made of nickel; aluminium or an article made of aluminium; lead or an article made of lead; zinc or an article made of zinc; tin or an article made of tin; another base metal, sintered metal or cermet, or an article made from one of these; a base-metal tool, implement, knife, spoon or fork, or a part thereof; or another miscellaneous article made of base metal?
✓
Step 2 · Chapter 72 Iron and steel 1 of 11 chapters in section XV
What is the product's form and steel type: pig or mirror iron, ferroalloy, directly reduced or porous iron, waste or scrap, granules or powder, ingot or other raw form, semi-finished product, flat-rolled product, bar, profile or wire—and is it non-alloy, stainless or other alloy steel?
✓
Step 3 · Heading 7211 Flat-rolled products of iron or non-alloy steel, of… 11 of 29 headings under chapter 72
Is the product under 600 mm wide, and is it only hot-rolled, only cold-rolled, or hot- or cold-rolled and further worked; if it is only hot-rolled, is it universal steel, at least 4.75 mm thick, or under 4.75 mm thick, and if it is only cold-rolled, does it contain under 0.25 weight-percent or at least 0.25 weight-percent carbon?
✓
Step 4 · Subheading 7211 13 Flat-rolled products of iron or non-alloy steel, si… 1 of 6 subheadings under heading 7211
Is it only hot-rolled, unplated, uncoated or unpainted universal steel rolled on four faces or in a closed groove, over 150 mm but under 600 mm wide, at least 4 mm thick, not coiled and without a relief pattern?

Pick the 8-digit code

Import duty on the codes below: 0.0%

Only one code below

7211 13 00

Duty free

This subheading has one 8-digit code, so that is the code to use.

Open 7211 13 00 Save

Compare the sibling codes

See all 6 codes at this level

7211 13 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" you are here 0.0%
7211 14 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") 0.0%
7211 19 Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats") 0.0%
7211 23 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon 0.0%
7211 29 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon 0.0%
7211 90 Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated 0.0%

Selling to Norway, Great Britain and the United States

What they charge on arrival.

Norway, Great Britain and the United States use their own tariff lines under the 6-digit HS code. The rates below are what their customs charge on goods arriving from the EU. Match the goods against each country's own wording before you rely on a rate.

Norway

Duty free

Their lines1 Norwegian line

72.11.1300 Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness

Norwegian tariff data checked Sept. 13, 2026.

Great Britain

Duty free

Their lines2 British lines

7211 13 00 11 Of a width not exceeding 350 mm and of a thickness of 50 mm or more

Northern Ireland follows other rules.

UK tariff data checked Sept. 13, 2026.

United States

50.0%

Estimated from published US measures

Their lines1 US line
Entry dateSept. 17, 2026

7211.13.00.00 Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad

The US importer of record files the entry.

US tariff data checked Sept. 16, 2026.

See the 1 Norwegian line

Selling to Norway

Norway splits the 6-digit category its own way, so these are Norway's own lines under it, not this EU code. Check your product against their wording; what Norwegian customs charges is shown per line.

72.11.1300

Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief

Ordinary duty

Duty free

Norwegian tariff data version 1.5/1.2, last checked Sept. 13, 2026.

Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.

See the 2 British lines

Selling to Great Britain

What UK customs charges when goods like these arrive in Great Britain.

All 2 UK lines under this code

They all have the same duty rates shown here.

Ordinary duty

Duty free

These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.

UK tariff data version v4.0.1599, last checked Sept. 13, 2026.

Contains public sector information licensed under the Open Government Licence v3.0.

Source: UK Department for Business and Trade (data.api.trade.gov.uk).

See the 1 US line

Selling to the United States

What US customs charges when goods like these arrive from the EU. The US importer of record files the entry and pays the duty.

7211.13.00.00

Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated, Not further worked than hot-rolled, Universal mill plate

General rate

Free

From the EU

50.0% Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin

Worked out for an entry on Sept. 17, 2026.

US tariff schedule 2026HTSRev19, last checked Sept. 16, 2026.

Last change we recorded: Revision 19 (2026), Sept. 16, 2026.

Anti-dumping and countervailing duties, US import taxes and customs fees are not included.

The descriptions above are the US tariff texts, which the United States publishes in English only.

Source: the US International Trade Commission's Harmonized Tariff Schedule (hts.usitc.gov), public domain, and the measures published in the Federal Register.

This is a planning estimate from the US Harmonized Tariff Schedule (revision shown) and the published Federal Register measures as of the date shown, for a shipment of EU origin. It is not a customs entry, legal advice or a broker's opinion, and tariffs.help is not a US-licensed customs broker. The US importer of record or their broker confirms the classification, origin, value and the duty due before filing.

Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with Toldstyrelsen, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.