Norway
Duty free*
- Their lines1 Norwegian line
72.08.3800 Of a thickness of 3 mm or more but less than 4.75 mm
Norwegian tariff data checked Sept. 13, 2026.
Code 7208 38 · Heading 7208
Hot-rolled, uncoated iron or non-alloy steel flat products in coils, at least 600 mm wide and at least 3 mm but less than 4,75 mm thick, unpickled and without a relief pattern
This covers flat-rolled products made of iron or non-alloy steel, supplied in coils, only hot-rolled and not plated, coated or covered. They must be at least 600 mm wide, at least 3 mm but less than 4,75 mm thick, unpickled and without a relief pattern.
For example
- A coil of hot-rolled, uncoated flat product made of non-alloy steel, at least 600 mm wide and at least 3 mm but less than 4,75 mm thick, unpickled and without a relief pattern
- A coil of hot-rolled, uncoated flat product made of iron, at least 600 mm wide and at least 3 mm but less than 4,75 mm thick, unpickled and without a relief pattern
See the official tariff text
Official tariff text
Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, not pickled, without patterns in relief
Show the steps
Pick the 8-digit code
Import duty on the codes below: 0.0%*
Only one code below
7208 38 00
Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, not pickled, without patterns in relief
Duty free*This subheading has one 8-digit code, so that is the code to use.
Compare the sibling codes
See all 14 codes at this level- 7208 10 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling process 0.0%*
- 7208 25 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm, pickled, without patterns in relief 0.0%*
- 7208 26 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, pickled, without patterns in relief 0.0%*
- 7208 27 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, pickled, without patterns in relief 0.0%*
- 7208 36 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 10 mm, not pickled, without patterns in relief 0.0%*
- 7208 37 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but < 10 mm, not pickled, without patterns in relief 0.0%*
-
7208 38 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, not pickled, without patterns in relief you are here 0.0%*
- 7208 39 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, not pickled, without patterns in relief 0.0%*
- 7208 40 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling process 0.0%*
- 7208 51 Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm, without patterns in relief 0.0%*
- 7208 52 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief 0.0%*
- 7208 53 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, without patterns in relief 0.0%*
- 7208 54 Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, without patterns in relief 0.0%*
- 7208 90 Flat-rolled products of iron or steel, of a width >= 600 mm, hot-rolled and further worked, but not clad, plated or coated 0.0%*
Selling to Norway, Great Britain and the United States
What they charge on arrival.
Norway, Great Britain and the United States use their own tariff lines under the 6-digit HS code. The rates below are what their customs charge on goods arriving from the EU. Match the goods against each country's own wording before you rely on a rate.
Great Britain
Duty free*
- Their lines2 British lines
7208 38 00 10 Intended for re-rolling
Northern Ireland follows other rules.
UK tariff data checked Sept. 13, 2026.
United States
50.0%†
Estimated from published US measures
- Their lines3 US lines
- Entry dateSept. 17, 2026
7208.38.00.15 Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled
The US importer of record files the entry.
US tariff data checked Sept. 16, 2026.
See the 1 Norwegian line
Selling to Norway
Norway splits the 6-digit category its own way, so these are Norway's own lines under it, not this EU code. Check your product against their wording; what Norwegian customs charges is shown per line.
-
72.08.3800
Of a thickness of 3 mm or more but less than 4.75 mm
- Ordinary duty
- Duty free*
Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.
See the 2 British lines
Selling to Great Britain
What UK customs charges when goods like these arrive in Great Britain.
-
All 2 UK lines under this code
They all have the same duty rates shown here.
- Ordinary duty
- Duty free*
These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.
Contains public sector information licensed under the Open Government Licence v3.0.
Source: UK Department for Business and Trade (data.api.trade.gov.uk).
See the 3 US lines
Selling to the United States
What US customs charges when goods like these arrive from the EU. The US importer of record files the entry and pays the duty.
-
7208.38.00.15
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated, Other, in coils, not further worked than hot-rolled, Of a thickness of 3 mm or more but less than 4.75 mm, High-strength steel
- General rate
- Free
- From the EU
- 50.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
-
7208.38.00.30
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated, Other, in coils, not further worked than hot-rolled, Of a thickness of 3 mm or more but less than 4.75 mm, Other, With untrimmed edges
- General rate
- Free
- From the EU
- 50.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
-
7208.38.00.90
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated, Other, in coils, not further worked than hot-rolled, Of a thickness of 3 mm or more but less than 4.75 mm, Other
- General rate
- Free
- From the EU
- 50.0%† Estimated from published US measures US headings applied: 9903.82.02 Section 232 steel, aluminium and copper, Proclamation 11021, heading 9903.82.02 of subchapter III of chapter 99 with U.S. note 16(a) and the lists of note 16(c)(i) to (c)(v): the duty provided in the applicable subheading plus 50 percent, on the full customs value, whatever the origin
Anti-dumping and countervailing duties, US import taxes and customs fees are not included.
The descriptions above are the US tariff texts, which the United States publishes in English only.
Source: the US International Trade Commission's Harmonized Tariff Schedule (hts.usitc.gov), public domain, and the measures published in the Federal Register.
This is a planning estimate from the US Harmonized Tariff Schedule (revision shown) and the published Federal Register measures as of the date shown, for a shipment of EU origin. It is not a customs entry, legal advice or a broker's opinion, and tariffs.help is not a US-licensed customs broker. The US importer of record or their broker confirms the classification, origin, value and the duty due before filing.
Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with Toldstyrelsen, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.
Save codes to your own collection
Create a free account to keep the customs codes you care about in one place, and come back to them whenever you need them.