Norway
Duty free*
- Their lines1 Norwegian line
39.20.6200 Of poly(ethylene terephthalate)
Norwegian tariff data checked Sept. 13, 2026.
Customs code · HS subheading 3920 62
Final code reached
Non-cellular PET sheets, films and strips over 0.35 mm thick
Without backing or reinforcement
This is a complete 8-digit customs code. Exports and Intrastat use it as it is. For an import into the EU, pick a 10-digit line below.
This code covers sheets, films, foil, tapes and strips made of poly(ethylene terephthalate) (PET). They must be over 0.35 mm thick, non-cellular, without backing, and not reinforced, laminated or joined to other materials; they may be unprocessed, surface-treated only, or cut only into square or rectangular shapes.
For example
- Unprocessed, non-cellular PET sheet over 0.35 mm thick, without backing, reinforcement or lamination
- Surface-treated-only PET film over 0.35 mm thick, without backing, reinforcement or lamination
- Square-cut PET foil over 0.35 mm thick, without backing, reinforcement or lamination
See the official tariff text
Official tariff text
Plates, sheets, film, foil and strip, of non-cellular poly"ethylene terephthalate", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of > 0,35 mm (excl. such self-adhesive products, and floor, wall and ceiling coverings of heading 3918)
You are seeing what applies when you export from the EU. Switch above if you import.
You are seeing what applies when you import into the EU. Switch above if you export.
Your answer for export
The full EU export code is 3920 62 90.
You do not pick a 10-digit EU import line for an export declaration or Intrastat. The destination classifies the goods under its own tariff.
8 digits, ready
Selling to Norway, Great Britain and the United States
What they charge on arrival.
Norway, Great Britain and the United States use their own tariff lines under the 6-digit HS code. The rates below are what their customs charge on goods arriving from the EU. Match the goods against each country's own wording before you rely on a rate.
Great Britain
6.0%*
- Their lines2 British lines
- EU originDuty free*
3920 62 90 10 Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more
Northern Ireland follows other rules.
UK tariff data checked Sept. 13, 2026.
United States
10.0%†
Estimated from published US measures
- Their lines3 US lines
- Entry dateSept. 18, 2026
3920.62.00.20 Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced
The US importer of record files the entry.
US tariff data checked Sept. 16, 2026.
See the 1 Norwegian line
Selling to Norway
Norway splits the 6-digit category its own way, so these are Norway's own lines under it, not this EU code. Check your product against their wording; what Norwegian customs charges is shown per line.
-
39.20.6200
Of poly(ethylene terephthalate)
- Ordinary duty
- Duty free*
Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.
See the 2 British lines
Selling to Great Britain
What UK customs charges when goods like these arrive in Great Britain.
-
All 2 UK lines under this code
They all have the same duty rates shown here.
- Ordinary duty
- 6.0%*
- Goods of EU origin
- Duty free* You need documentation of EU preferential origin to use this rate.
These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.
Contains public sector information licensed under the Open Government Licence v3.0.
Source: UK Department for Business and Trade (data.api.trade.gov.uk).
See the 3 US lines
Selling to the United States
What US customs charges when goods like these arrive from the EU. The US importer of record files the entry and pays the duty.
-
3920.62.00.20
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials, Of polycarbonates, alkyd resins, polyallyl esters or other polyesters, Of poly(ethylene terephthalate), Metallized PET film, Gift wrap
- General rate
- 4.2%
- From the EU
- 10.0%† Estimated from published US measures US headings applied: 9903.05.39 Section 301 forced-labour action, 91 FR 47318 (memorandum 91 FR 47717), U.S. note 52 to subchapter III of chapter 99
-
3920.62.00.50
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials, Of polycarbonates, alkyd resins, polyallyl esters or other polyesters, Of poly(ethylene terephthalate), Metallized PET film, Other
- General rate
- 4.2%
- From the EU
- 10.0%† Estimated from published US measures US headings applied: 9903.05.39 Section 301 forced-labour action, 91 FR 47318 (memorandum 91 FR 47717), U.S. note 52 to subchapter III of chapter 99
-
3920.62.00.90
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials, Of polycarbonates, alkyd resins, polyallyl esters or other polyesters, Of poly(ethylene terephthalate), Other
- General rate
- 4.2%
- From the EU
- 10.0%† Estimated from published US measures US headings applied: 9903.05.39 Section 301 forced-labour action, 91 FR 47318 (memorandum 91 FR 47717), U.S. note 52 to subchapter III of chapter 99
Anti-dumping and countervailing duties, US import taxes and customs fees are not included.
The descriptions above are the US tariff texts, which the United States publishes in English only.
Source: the US International Trade Commission's Harmonized Tariff Schedule (hts.usitc.gov), public domain, and the measures published in the Federal Register.
This is a planning estimate from the US Harmonized Tariff Schedule (revision shown) and the published Federal Register measures as of the date shown, for a shipment of EU origin. It is not a customs entry, legal advice or a broker's opinion, and tariffs.help is not a US-licensed customs broker. The US importer of record or their broker confirms the classification, origin, value and the duty due before filing.
Before you use the code
Check the facts that sit outside the code
The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.
- The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
- Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
- Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with Toldstyrelsen or TARIC.
On an EU import declaration
Pick the 10-digit line that matches the goods.
2 import lines
When these goods are imported into the EU, the declaration needs a 10-digit code. Under 3920 62 90 the EU tariff has 2 lines, each with its own wording.
You or your customs agent pick the line whose wording fits the goods; the last line, "Other", covers what none of the specific wordings describe.
- Match the whole wording A line is its own wording plus the grouping text above it. Read both before you settle on one.
-
3920 62 90 10
Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm
-
3920 62 90 90
Other
No import line matches that search.
A suspension is a lower rate the EU grants for specific products; whether your goods qualify depends on the line's wording and conditions.
Exports from the EU and Intrastat normally use the 8-digit code as it is.
EU tariff data of Sept. 13, 2026.
Rates, origin and documents
Read the signals first. Open only the ones you want to check.
Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.
Data of Sept. 1, 2026
Lower duty for goods from some countries
Possible
Preferential rates exist for goods originating in:
- Andorra
- San Marino
- Türkiye
- Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe
- Botswana, Eswatini, Lesotho, Mozambique and Namibia
- Western Sahara
- European Union, Iceland, Liechtenstein and Norway
- Costa Rica, El Salvador, Guatemala, Honduras, Nicaragua and Panama
- +39 origins
These rates apply to Economic Partnership Agreements; CARIFORUM except Haiti; GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms); GSP+ (incentive arrangement for sustainable development and good governance); OCTs (Overseas Countries and Territories); GSP - General arrangements except India.
Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC database
A limited quantity at a lower rate
Check
A tariff quota is recorded for this code. This does not say whether any of the quota is still available. It covers goods originating in:
- Costa Rica, El Salvador, Guatemala, Honduras, Nicaragua and Panama
- Colombia
- Ecuador
- Peru
Restrictions and paperwork
Important
Import restrictions are recorded for goods originating in:
- Ukraine
- Belarus
- Russian Federation
The EU records document conditions on this code. What customs may ask for depends on where the goods come from, exactly what the product is and the customs procedure.
Proof of origin 2 conditions
If you claim a lower rate for goods from a country the EU has a trade agreement with, customs asks for proof of origin, for example a EUR.1 certificate or an origin declaration.
Show the EU's own wording for these conditions
- Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
- Movement certificate EUR.1
Sanctions and restricted regions 10 conditions
Some conditions come from EU sanctions rules. They matter when the goods are linked to a country or region the EU restricts trade with.
Show the EU's own wording for these conditions
- Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
- Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
- Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 8f of Regulation (EU) No 765/2006)
- Import authorisation by virtue of article 1ra paragraph 10 of Council Regulation (EU) 765/2006
- The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 4)
- The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 3)
- The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3aa)
- Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
- Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014
- Import authorisation by virtue of article 3i paragraph 3c of Council Regulation (EU) 833/2014
One last classification check
Check the path and the nearest alternatives.
Use this view if you are still unsure the code describes the product precisely.
Show the steps
Compare with the codes next to it.
Compare the sibling codes at this level before you settle on this one.
- another option 3920 62 12 Poly(ethylene terephthalate) film of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks, and poly"ethylene terephthalate" film, not reinforced, of a thickness of >= 100 micrometres but <= 150 micrometres, for the manufacture of photopolymer printing plates No rate on file
- another option 3920 62 19 Plates, sheets, film, foil and strip, of non-cellular poly"ethylene terephthalate", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly"ethylene terephthalate" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly"ethylene terephthalate" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks) 6.5%*
-
you are here 3920 62 90 Plates, sheets, film, foil and strip, of non-cellular poly"ethylene terephthalate", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of > 0,35 mm (excl. such self-adhesive products, and floor, wall and ceiling coverings of heading 3918) 6.5%*
Worth comparing
Codes that sit close to this one, for when the material itself could be different.
Similar products elsewhere in the tariff
- 3921 90 90 Plates, sheets, film, foil and strip, of plastics, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic, addition polymerization products, condensation polymerization products and rearrangement polymerization products; self-adhesive products and floor, wall and ceiling coverings of heading 3918) 6.5%*
- 3921 90 10 Plates, sheets, film, foil and strip, of polyesters, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic; self-adhesive products, floor, wall and ceiling coverings of heading 3918) 6.5%*
- 3921 19 00 Plates, sheets, film, foil and strip, of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl.those of polymers of styrene, vinyl chloride, polyurethanes and regenerated cellulose, self-adhesive products, floor, wall and ceiling coverings of heading 3918 and sterile surgical or dental adhesion barriers of subheading 3006.10.30) 6.5%*
- 3921 90 60 Plates, sheets, film, foil and strip, of addition polymerization products, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918) 6.5%*
- 3921 90 49 Plates, sheets, film, foil and strip, of unlaminated amino-resins, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918) 6.5%*
Often confused with
-
3920 62 12
Poly(ethylene terephthalate) film of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks, and poly"ethylene terephthalate" film, not reinforced, of a thickness of >= 100 micrometres but <= 150 micrometres, for the manufacture of photopolymer printing plates
No rate on file
That code covers specified PET films for making diskettes or photopolymer letterpress plates, including the stated thickness ranges; the present code covers PET products over 0.35 mm thick without those stated purposes.
-
3920 62 19
Plates, sheets, film, foil and strip, of non-cellular poly"ethylene terephthalate", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly"ethylene terephthalate" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly"ethylene terephthalate" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks)
6.5%*
This code describes PET products of thickness <= 0.35 mm, while the present code describes products over 0.35 mm thick.
-
3921 90 10
Plates, sheets, film, foil and strip, of polyesters, reinforced, laminated, supported or similarly combined with other materials, unworked or merely surface-worked or merely cut into squares or rectangles (excl. of cellular plastic; self-adhesive products, floor, wall and ceiling coverings of heading 3918)
6.5%*
That code covers polyester sheets, films and strips with backing, reinforcement, lamination or a similar connection to other materials; the present code excludes those features.
Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with Toldstyrelsen, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.
Save codes to your own collection
Create a free account to keep the customs codes you care about in one place, and come back to them whenever you need them.