Norway
Duty free*
- Their lines3 Norwegian lines
39.19.9010 Of condensation, polycondensation and polyaddition products
Norwegian tariff data checked Sept. 13, 2026.
Customs code · HS subheading 3919 90
Final code reached
Tape and other flat forms, > 20 cm wide
This is a complete 8-digit customs code. Exports and Intrastat use it as it is. For an import into the EU, pick a 10-digit line below.
This code covers self-adhesive flat forms made of plastic, including sheets, films, foil, tape and strips, whether or not supplied in rolls, with a width of > 20 cm. It does not cover plastic floor, wall or ceiling coverings under heading 3918 or circular polishing pads used to make semiconductor wafers.
For example
Official tariff text
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls > 20 cm wide (excl. floor, wall and ceiling coverings of heading 3918, and circular polishing pads used in semiconductor wafer production))
You are seeing what applies when you export from the EU. Switch above if you import.
You are seeing what applies when you import into the EU. Switch above if you export.
Your answer for export
You do not pick a 10-digit EU import line for an export declaration or Intrastat. The destination classifies the goods under its own tariff.
8 digits, ready
Selling to Norway, Great Britain and the United States
Norway, Great Britain and the United States use their own tariff lines under the 6-digit HS code. The rates below are what their customs charge on goods arriving from the EU. Match the goods against each country's own wording before you rely on a rate.
Norway
Duty free*
39.19.9010 Of condensation, polycondensation and polyaddition products
Norwegian tariff data checked Sept. 13, 2026.
Great Britain
6.0%*
3919 90 80 10 For use in certain types of aircraft
Northern Ireland follows other rules.
UK tariff data checked Sept. 13, 2026.
United States
10.0%†
Estimated from published US measures
3919.90.10.00 Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics
The US importer of record files the entry.
US tariff data checked Sept. 16, 2026.
Norway splits the 6-digit category its own way, so these are Norway's own lines under it, not this EU code. Check your product against their wording; what Norwegian customs charges is shown per line.
39.19.9010
Of condensation, polycondensation and polyaddition products
39.19.9020
Of addition polymerisation products
39.19.9090
Other
Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.
What UK customs charges when goods like these arrive in Great Britain.
All 23 UK lines under this code
They all have the same duty rates shown here.
These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.
Contains public sector information licensed under the Open Government Licence v3.0.
Source: UK Department for Business and Trade (data.api.trade.gov.uk).
What US customs charges when goods like these arrive from the EU. The US importer of record files the entry and pays the duty.
3919.90.10.00
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls, Other, Having a light-reflecting surface produced in whole or in part by glass grains (ballotini)
3919.90.50.10
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls, Other, Reflectorized sheeting
3919.90.50.20
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls, Other, Filament reinforced tape
3919.90.50.30
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls, Other, Electrical tape
3919.90.50.40
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls, Other, Transparent tape
3919.90.50.60
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls, Other
Anti-dumping and countervailing duties, US import taxes and customs fees are not included.
The descriptions above are the US tariff texts, which the United States publishes in English only.
Source: the US International Trade Commission's Harmonized Tariff Schedule (hts.usitc.gov), public domain, and the measures published in the Federal Register.
This is a planning estimate from the US Harmonized Tariff Schedule (revision shown) and the published Federal Register measures as of the date shown, for a shipment of EU origin. It is not a customs entry, legal advice or a broker's opinion, and tariffs.help is not a US-licensed customs broker. The US importer of record or their broker confirms the classification, origin, value and the duty due before filing.
Before you use the code
The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.
On an EU import declaration
23 import lines
When these goods are imported into the EU, the declaration needs a 10-digit code. Under 3919 90 80 the EU tariff has 23 lines, each with its own wording.
You or your customs agent pick the line whose wording fits the goods; the last line, "Other", covers what none of the specific wordings describe.
Some lines depend on what the goods will be used for and need customs authorisation; matching the wording alone does not give a lower rate.
3919 90 80 10
For use in certain types of aircraft
6.5%*
Duty suspension: 0% under an end-use authorisation*
Conditions apply, customs authorisation needed.
Other
3919 90 80 20
Polyester film: - coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and - on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner
3919 90 80 23
Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner
3919 90 80 24
Reflecting laminated sheet: - consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, - covered on both sides with one or more layers of plastic material and - covered on one side with an adhesive layer and a release sheet
3919 90 80 30
Reflecting sheet: - of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern - covered on one or both sides with one or more layers of plastic or metallisation, and - whether or not covered on one side with a self-adhesive layer and a release sheet
3919 90 80 31
Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film
3919 90 80 33
Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1 245 mm but not more than 1 255 mm
3919 90 80 45
Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm
3919 90 80 48
Polytetrafluoroethylene film, -with a thickness of 50 µm or more, -with a width of 6,30 mm or more but not more than 740 mm, -an elongation at break of not more than 200 %, and -coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 µm
3919 90 80 49
Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet
3919 90 80 50
Self-adhesive reflecting sheet whether or not in segmented pieces, - whether or not containing a watermark, - with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: - a layer of acrylic or vinyl polymer, - a layer of poly(methyl methacrylate) or polycarbonate containing microprisms, - a layer of metallisation, - an adhesive layer, and - a release sheet - whether or not containing an additional layer of polyester
3919 90 80 53
Acrylic foam tape: - covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive, - covered on the other side with an acrylic pressure sensitive adhesive, - covered on one or both sides with a release sheet, - with a peel adhesion of more than 25 N/cm (at an angle of 90° as determined by the ASTM D 3330 method)
3919 90 80 54
Poly(vinyl chloride) film, on one side covered with - a polymer layer - an adhesive layer - a release liner, on one side embossed, containing oblate spheres; whether or not on the other side covered with an adhesive layer and a metallised polymer layer
3919 90 80 55
Black polyvinyl chloride film: -with a gloss of more than 25 degrees according to ASTM D 2457, -whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release liner for use in the manufacture of die-cut films for interior and exterior surfaces of cars
6.5%*
Duty suspension: 0% under an end-use authorisation*
Conditions apply, customs authorisation needed.
3919 90 80 56
Transparent polyethylene film coated on one side with an aqueous acrylic adhesive, of a thickness of 30 μm to 50 μm, put up in rolls of a width of 52 cm or more but not more than 154 cm
3919 90 80 57
Self-adhesive polycarbonate film, printed, whether or not arched, with: -a thickness of 0,3 mm or more, but not more than 0,4 mm, -minimum dimensions of 63 mm x 15 mm, -maximum dimensions of 278 mm x 117 mm, -a weight of not more than 5 g per piece, intended for integration into combined instrument panels of passenger cars
3919 90 80 58
Biaxially-oriented film of poly(methyl methacrylate), with a thickness of 20 μm or more but not more than 90 μm, covered on one side with an adhesive layer and a release sheet
3919 90 80 65
Self-adhesive film with a thickness of 40 µm or more, but not more than 475 µm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner
3919 90 80 70
Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad
3919 90 80 80
Self adhesive reflecting film, consisting of several layers including: - a copolymer of acrylic resin, - polyurethane, - a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, - glass microspheres, and - an adhesive layer, with a release liner on one or both sides
3919 90 80 82
Reflecting film consisting of: - a polyurethane layer, - a glass microspheres layer, - a metallised aluminium layer, and - an adhesive, covered on one or both sides with a release liner, - whether or not a poly(vinyl chloride) layer, - a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use
3919 90 80 83
Reflector or diffuser sheets, in rolls, -for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or -for equal transmission and distribution of light, intended for LCD modules
3919 90 80 99
Other
6.5%*
Duty suspension: 0% for ships, boats and drilling platforms*
Conditions apply, customs authorisation needed.
No import line matches that search.
A suspension is a lower rate the EU grants for specific products; whether your goods qualify depends on the line's wording and conditions.
Exports from the EU and Intrastat normally use the 8-digit code as it is.
EU tariff data of Sept. 13, 2026.
Rates, origin and documents
Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.
Data of Sept. 1, 2026
Preferential rates exist for goods originating in:
These rates apply to Economic Partnership Agreements; CARIFORUM except Haiti; GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms); GSP+ (incentive arrangement for sustainable development and good governance); OCTs (Overseas Countries and Territories); GSP - General arrangements except India.
Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC databaseImport restrictions are recorded for goods originating in:
The EU records document conditions on this code. What customs may ask for depends on where the goods come from, exactly what the product is and the customs procedure.
Proof of origin 2 conditions
If you claim a lower rate for goods from a country the EU has a trade agreement with, customs asks for proof of origin, for example a EUR.1 certificate or an origin declaration.
Sanctions and restricted regions 10 conditions
Some conditions come from EU sanctions rules. They matter when the goods are linked to a country or region the EU restricts trade with.
Statements that the goods are outside a rule's scope 2 conditions
Some conditions are statements that a rule does not cover the goods, for example that the product is not on a controlled list.
Other conditions 6 conditions
These conditions match none of the groups above. Whether customs asks for one depends on the goods, where they come from and the customs procedure.
One last classification check
Use this view if you are still unsure the code describes the product precisely.
Compare the sibling codes at this level before you settle on this one.
Classification decides the rate here: from duty free to 6.5%.
Worth comparing
Codes that sit close to this one, for when the material itself could be different.
That heading covers plastic floor coverings and certain plastic wall or ceiling coverings, which are excluded from this code.
That code is specifically for self-adhesive circular polishing pads used to make semiconductor wafers; this code covers other qualifying flat plastic forms.
That code covers laminated aminoplast sheets and similar forms connected with other materials, while its title excludes self-adhesive products.
Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with Toldstyrelsen, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.
Create a free account to keep the customs codes you care about in one place, and come back to them whenever you need them.