Norway
Duty free*
- Their lines1 Norwegian line
39.01.9000 Other
Norwegian tariff data checked Sept. 13, 2026.
Customs code · HS subheading 3901 90
Final code reached
Excluding the specifically listed polymer types
This is a complete 8-digit customs code. Exports and Intrastat use it as it is. For an import into the EU, pick a 10-digit line below.
This code covers unprocessed ethylene polymers other than polyethylene, ethylene-vinyl acetate copolymers, ethylene-alpha-olefin copolymers with a density < 0,94, the specified ionomer resin, and the specified A-B-A block copolymer. The product must be in a form covered by Chapter 39 Note 6(b).
For example
Official tariff text
Polymers of ethylene, in primary forms (excl. polyethylene, ethylene-vinyl acetate copolymers, ethylene-alpha-olefins copolymers having a specific gravity of < 0,94, ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid and A-B-A block copolymer of ethylene of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight <= 35% of styrene, in blocks of irregular shape, lumps, powders, granules, flakes and similar bulk forms)
You are seeing what applies when you export from the EU. Switch above if you import.
You are seeing what applies when you import into the EU. Switch above if you export.
Your answer for export
You do not pick a 10-digit EU import line for an export declaration or Intrastat. The destination classifies the goods under its own tariff.
8 digits, ready
Selling to Norway, Great Britain and the United States
Norway, Great Britain and the United States use their own tariff lines under the 6-digit HS code. The rates below are what their customs charge on goods arriving from the EU. Match the goods against each country's own wording before you rely on a rate.
Norway
Duty free*
39.01.9000 Other
Norwegian tariff data checked Sept. 13, 2026.
Great Britain
The rate depends on the line.
3901 90 80 10 For cavity filling, for use in certain types of aircraft
Northern Ireland follows other rules.
UK tariff data checked Sept. 13, 2026.
United States
10.0%†
Estimated from published US measures
3901.90.10.00 Polymers of ethylene, in primary forms, Other, Elastomeric
The US importer of record files the entry.
US tariff data checked Sept. 16, 2026.
Norway splits the 6-digit category its own way, so these are Norway's own lines under it, not this EU code. Check your product against their wording; what Norwegian customs charges is shown per line.
39.01.9000
Other
Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.
What UK customs charges when goods like these arrive in Great Britain.
3901 90 80 10
For cavity filling, for use in certain types of aircraft
3901 90 80 53
Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with -|an acrylic acid content of 18,5|% or more but not more than 49,5|% by weight (ASTM D4094), and -|a melt flow rate of 10g/10|min (MFR 125|°C/2.16|kg, ASTM D1238) or more
3901 90 80 55
Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: - an acrylic acid content of 6 % or more but not more than 50 % by weight, and - a melt flow rate of 1g/10 min or more at 190 °C/2.16 kg (measured using ASTM D1238)
3901 90 80 67
Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more
3901 90 80 73
Mixture containing by weight - 80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and - 6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)
3901 90 80 75
Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (CAS RN 37433-35-5), in the form of pellets
3901 90 80 85
Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (CAS RN 61843-70-7) in the form of pellets
3901 90 80 91
Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid
3901 90 80 92
Chlorosulphonated polyethylene
3901 90 80 93
Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets
3901 90 80 94
Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene
3901 90 80 97
Chlorinated polyethylene, in the form of powder
3901 90 80 99
Other
These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.
Contains public sector information licensed under the Open Government Licence v3.0.
Source: UK Department for Business and Trade (data.api.trade.gov.uk).
What US customs charges when goods like these arrive from the EU. The US importer of record files the entry and pays the duty.
3901.90.10.00
Polymers of ethylene, in primary forms, Other, Elastomeric
3901.90.55.01
Polymers of ethylene, in primary forms, Other, Ethylene copolymers
3901.90.90.00
Polymers of ethylene, in primary forms, Other
Anti-dumping and countervailing duties, US import taxes and customs fees are not included.
The descriptions above are the US tariff texts, which the United States publishes in English only.
Source: the US International Trade Commission's Harmonized Tariff Schedule (hts.usitc.gov), public domain, and the measures published in the Federal Register.
This is a planning estimate from the US Harmonized Tariff Schedule (revision shown) and the published Federal Register measures as of the date shown, for a shipment of EU origin. It is not a customs entry, legal advice or a broker's opinion, and tariffs.help is not a US-licensed customs broker. The US importer of record or their broker confirms the classification, origin, value and the duty due before filing.
Before you use the code
The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.
On an EU import declaration
13 import lines
When these goods are imported into the EU, the declaration needs a 10-digit code. Under 3901 90 80 the EU tariff has 13 lines, each with its own wording.
You or your customs agent pick the line whose wording fits the goods; the last line, "Other", covers what none of the specific wordings describe.
Some lines depend on what the goods will be used for and need customs authorisation; matching the wording alone does not give a lower rate.
3901 90 80 10
For cavity filling, for use in certain types of aircraft
6.5%*
Duty suspension: 0% under an end-use authorisation*
Conditions apply, customs authorisation needed.
Other
3901 90 80 53
Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with - an acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (ASTM D4094), and - a melt flow rate of 10g/10 min (MFR 125 °C/2.16 kg, ASTM D1238) or more
3901 90 80 55
Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: - an acrylic acid content of 6 % or more but not more than 50 % by weight, and - a melt flow rate of 1g/10 min or more at 190 °C/2.16 kg (measured using ASTM D1238)
3901 90 80 67
Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more
3901 90 80 73
Mixture containing by weight - 80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and - 6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)
3901 90 80 75
Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (CAS RN 37433-35-5), in the form of pellets
3901 90 80 85
Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (CAS RN 61843-70-7) in the form of pellets
3901 90 80 91
Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid
3901 90 80 92
Chlorosulphonated polyethylene
3901 90 80 93
Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets
6.5%*
Duty suspension: 0% under an end-use authorisation*
Conditions apply, customs authorisation needed.
3901 90 80 94
Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene
3901 90 80 97
Chlorinated polyethylene, in the form of powder
3901 90 80 99
Other
Duty free*
No import line matches that search.
A suspension is a lower rate the EU grants for specific products; whether your goods qualify depends on the line's wording and conditions.
Exports from the EU and Intrastat normally use the 8-digit code as it is.
EU tariff data of Sept. 13, 2026.
Rates, origin and documents
Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.
Data of Sept. 1, 2026
Preferential rates exist for goods originating in:
These rates apply to Economic Partnership Agreements; CARIFORUM except Haiti; GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms); GSP+ (incentive arrangement for sustainable development and good governance); OCTs (Overseas Countries and Territories); GSP - General arrangements except India.
Whether you can use one depends on the origin rules for the goods and on the documentation you can show.
Check this code in the official EU TARIC databaseImport restrictions are recorded for goods originating in:
The EU records document conditions on this code. What customs may ask for depends on where the goods come from, exactly what the product is and the customs procedure.
Proof of origin 2 conditions
If you claim a lower rate for goods from a country the EU has a trade agreement with, customs asks for proof of origin, for example a EUR.1 certificate or an origin declaration.
Sanctions and restricted regions 11 conditions
Some conditions come from EU sanctions rules. They matter when the goods are linked to a country or region the EU restricts trade with.
Product controls and permits 1 condition
Depending on the exact product, customs may ask for a licence, a permit or a control certificate before the goods are released.
Statements that the goods are outside a rule's scope 2 conditions
Some conditions are statements that a rule does not cover the goods, for example that the product is not on a controlled list.
Other conditions 7 conditions
These conditions match none of the groups above. Whether customs asks for one depends on the goods, where they come from and the customs procedure.
One last classification check
Use this view if you are still unsure the code describes the product precisely.
Compare the sibling codes at this level before you settle on this one.
Worth comparing
Codes that sit close to this one, for when the material itself could be different.
That code specifically covers the stated ionomer resin and A-B-A block copolymers with a styrene content <= 35 weight percent; this code excludes them.
That code covers unprocessed propylene copolymers, whereas this code concerns other unprocessed ethylene polymers.
That code covers polymers of propylene or other olefins, whereas this code concerns other unprocessed ethylene polymers.
Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with Toldstyrelsen, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.
Create a free account to keep the customs codes you care about in one place, and come back to them whenever you need them.