tariffs.help
Log in Create free account

Customs code · HS subheading 3811 21

Final code reached

Lubricating-oil additives containing petroleum-derived oil or oil from crude oils of bituminous minerals

This is a complete 8-digit customs code. Exports and Intrastat use it as it is. For an import into the EU, pick a 10-digit line below.

This covers prepared additives for lubricating oils when they contain oil derived from petroleum or from crude oils originating from bituminous minerals. The product must be an additive for lubricating oil, not an additive for another mineral-oil use.

For example

  • A lubricating-oil additive preparation containing oil derived from petroleum
  • A lubricating-oil additive preparation containing oil from crude oils originating from bituminous minerals
See the official tariff text

Official tariff text

Prepared additives for oil lubricants containing petroleum oil or bituminous mineral oil

You are seeing what applies when you export from the EU. Switch above if you import.

You are seeing what applies when you import into the EU. Switch above if you export.

Your answer for export

The full EU export code is 3811 21 00.

You do not pick a 10-digit EU import line for an export declaration or Intrastat. The destination classifies the goods under its own tariff.

8 digits, ready

Selling to Norway, Great Britain and the United States

What they charge on arrival.

Norway, Great Britain and the United States use their own tariff lines under the 6-digit HS code. The rates below are what their customs charge on goods arriving from the EU. Match the goods against each country's own wording before you rely on a rate.

Norway

Duty free

  • Their lines1 Norwegian line

38.11.2100 Containing petroleum oils or oils obtained from bituminous minerals

Norwegian tariff data checked Sept. 13, 2026.

Great Britain

4.0%

  • Their lines35 British lines
  • EU originDuty free

3811 21 00 11 Dispersing agent and oxidation inhibitor containing : - o-amino polyisobutylenephenol

Northern Ireland follows other rules.

UK tariff data checked Sept. 13, 2026.

United States

10.0%

Estimated from published US measures

  • Their lines1 US line
  • Entry dateSept. 17, 2026

3811.21.00.00 Antiknock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers

The US importer of record files the entry.

US tariff data checked Sept. 16, 2026.

See the 1 Norwegian line

Selling to Norway

Norway splits the 6-digit category its own way, so these are Norway's own lines under it, not this EU code. Check your product against their wording; what Norwegian customs charges is shown per line.

  • 38.11.2100

    Containing petroleum oils or oils obtained from bituminous minerals

    Ordinary duty
    Duty free

Norwegian tariff data version 1.5/1.2, last checked Sept. 13, 2026.

Contains data from Norwegian Customs (data.toll.no), licensed under CC BY 4.0, adapted for display.

See the 35 British lines

Selling to Great Britain

What UK customs charges when goods like these arrive in Great Britain.

  • All 35 UK lines under this code

    They all have the same duty rates shown here.

    Ordinary duty
    4.0%
    Goods of EU origin
    Duty free You need documentation of EU preferential origin to use this rate.

These rates apply in Great Britain. Different rules may apply for goods entering Northern Ireland.

UK tariff data version v4.0.1599, last checked Sept. 13, 2026.

Contains public sector information licensed under the Open Government Licence v3.0.

Source: UK Department for Business and Trade (data.api.trade.gov.uk).

See the 1 US line

Selling to the United States

What US customs charges when goods like these arrive from the EU. The US importer of record files the entry and pays the duty.

  • 3811.21.00.00

    Antiknock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils, Additives for lubricating oils, Containing petroleum oils or oils obtained from bituminous minerals

    General rate
    6.5%
    From the EU
    10.0% Estimated from published US measures US headings applied: 9903.05.39 Section 301 forced-labour action, 91 FR 47318 (memorandum 91 FR 47717), U.S. note 52 to subchapter III of chapter 99

Worked out for an entry on Sept. 17, 2026.

US tariff schedule 2026HTSRev19, last checked Sept. 16, 2026.

Last change we recorded: Revision 19 (2026), Sept. 16, 2026.

Anti-dumping and countervailing duties, US import taxes and customs fees are not included.

The descriptions above are the US tariff texts, which the United States publishes in English only.

Source: the US International Trade Commission's Harmonized Tariff Schedule (hts.usitc.gov), public domain, and the measures published in the Federal Register.

This is a planning estimate from the US Harmonized Tariff Schedule (revision shown) and the published Federal Register measures as of the date shown, for a shipment of EU origin. It is not a customs entry, legal advice or a broker's opinion, and tariffs.help is not a US-licensed customs broker. The US importer of record or their broker confirms the classification, origin, value and the duty due before filing.

Before you use the code

Check the facts that sit outside the code

The code can be right while what you pay still changes, because of where the goods come from, when they arrive, or extra EU measures.

  1. The product and its form Check that your product really matches this description, including what it is made of and the form it arrives in.
  2. Country of origin Trade agreements, sanctions and extra measures can change the treatment of the very same code.
  3. Current tariff measures Check today's rate, any restrictions or licences, and the quantity customs asks for, with Toldstyrelsen or TARIC.

On an EU import declaration

Pick the 10-digit line that matches the goods.

35 import lines

When these goods are imported into the EU, the declaration needs a 10-digit code. Under 3811 21 00 the EU tariff has 35 lines, each with its own wording.

You or your customs agent pick the line whose wording fits the goods; the last line, "Other", covers what none of the specific wordings describe.

Some lines depend on what the goods will be used for and need customs authorisation; matching the wording alone does not give a lower rate.

  1. Match the whole wording A line is its own wording plus the grouping text above it. Read both before you settle on one.
  2. Check the intended use On some lines the lower rate belongs to what the goods will be used for, not to the goods alone.
  3. Confirm the authorisation Where the lower rate carries conditions, customs asks for an authorisation before it can be used.
  • Additives for lubricating oils

  • 3811 21 00 11

    Dispersing agent and oxidation inhibitor containing : - o-amino polyisobutylenephenol (CAS RN 78330-13-9), - more than 30 % by weight but not more than 50 % by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 12

    Dispersing agent containing : - esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9), - 35 % or more but not more than 55 % by weight of mineral oils and - with a chlorine content of not more than 0,05 % by weight, used in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 13

    Additives containing : - borated magnesium (C16-C24) alkylbenzene sulphonates and - mineral oils, having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 14

    Dispersing agent : - containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9), - containing 35 % or more but not more than 55 % by weight of mineral oils, - with a chlorine content by weight of not more than 0,05 %, - having a total base number of less than 15, used in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 16

    Detergent containing : - Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol) - 40 % or more but not more than 60 % by weight of mineral oils and - having a total base number more than 120 used in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 19

    Additives containing: - a polyisobutylene succinimide based mixture, and - more than 30 % but not more than 50 % by weight of mineral oils, having a total base number of more than 40, for use in the manufacture of lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 20

    Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil

  • 3811 21 00 21

    Additive containing by weight: -90 % or more but not more than 97 % of reaction products of butyl-cyclohex-3-enecarboxylate and sulphur (CAS RN 160305-95-3), -3 % or more but not more than 10 % of mineral oil, for use in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 22

    Additive consisting essentially of: -Polyisobutenyl succinic anhydride (CAS RN 192662-34-3) reaction product with N,N-diethylaminoethanol (CAS RN 100-37-8), -25 % or more by weight, but not more than 40 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 24

    Additive consisting essentially of: -Polyisobutenyl succinic anhydride reaction product with polyethylenepolyamines, borated (CAS RN 134758-95-5), with a chlorine content by weight of 0,05 % or more but not more than 0,25 % and a total base number (TBN) of more than 20, -45 % and more by weight and no more than 55 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 25

    Additives containing: - a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10,000 but not more than 20,000, and - more than 15 % , but not more than 30 % by weight of mineral oils, for use in the manufacture of lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 26

    Additive consisting essentially of: -Phosphorodithioic acid, mixed O,O-bis (1,3-dimethylbutyl and isopropyl) esters, zinc salts (CAS RN 84605-29-8), -7 % or more by weight but not more than 12 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 27

    Additives containing: -10 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, and -mineral oils, for use in the manufacture of lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 28

    Additive consisting essentially of: -Zinc bis(O,O-bis(2-ethylhexyl)) bis (dithiophosphate) (CAS RN 4259-15-8); -triphenyl phosphite (CAS RN 101-02-0) more than 0,5 % by weight but not more than 6 % by weight, -O,O,O-triphenyl phosphorothioate (CAS RN 597-82-0) more than 0,5 % by weight but not more than 6 % by weight, and not more than 7,5 % by weight of the combination of triphenylphosphorus compounds -10 % or more by weight but not more than 20 % by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 29

    Additive containing by weight: -25 % or more but not more than 40 % of calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0), -30 % or more but not more than 65 % of mineral oils, for use in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 30

    Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process

  • 3811 21 00 32

    Additive consisting essentially of: -Zinc O,O,O',O'-tetrakis (1,3-dimethylbutyl) bis(phosphorodithioate) (CAS RN 2215-35-2), -4 % or more by weight but not more than 12 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 33

    Additives containing: - calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and - mineral oils, having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 34

    Detergent containing: -benzenesulfonic acid, methyl-, mono-C20-24-branched alkyl derivs., calcium salts (CAS RN 722503-68-6), -more than 30 % but not more than 60 % by weight of mineral oils, and, -having a total base number of more than 310 but not more than 340, used in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 37

    Additives containing: - a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, and - more than 50 % but not more than 75 % by weight of mineral oils, for use in the manufacture of lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 38

    Solution of mineral oils (CAS RN 64742-52-5, 64742-53-6, 64742-56-9 or blends thereof) containing by weight: -25 % or more but not more than 55 % of the barium, calcium, magnesium or zinc salt of dinonylnaphthylsulphonic acid (CAS RN 25619-56-1, 28015-99-8, 28016-00-4, or 57855-77-3) -whether or not, not more than 25 % of the barium, calcium, magnesium or zinc salt of a mixture of C3-C24 carboxylic acids (CAS RN 68990-37-4)

  • 3811 21 00 48

    Additives containing: - overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) and - by weight more than 25% but not more than 50% of mineral oils, - having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils or for use in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 53

    Additives containing: - overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and - by weight more than 40 % but not more than 60 % of mineral oil, having a total base number of 280 or more but not more than 420,for use in the manufacture of lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 55

    Additives containing: - low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8) and - by weight more than 40 % but not more than 60 % mineral oils, having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 60

    Additives for lubricating oils, containing mineral oils, - based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %, - with a total base number (TBN) of 280 or more but not more than 320, used as a concentrated additive for the manufacture of engine oils through a blending process

  • 3811 21 00 63

    Additives containing: - an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 % and - by weight more than 40 % but not more than 60 % of mineral oils, having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 65

    Additives containing: - a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), and - more than 35 % but not more than 50 % by weight of mineral oils, having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 70

    Additives for lubricating oils, - containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), - containing mineral oils, - with a chlorine content by weight of 0,05 % or more but not more than 0,25 %, - with a total base number (TBN) of more than 20, used as a concentrated additive for the manufacture of engine oils through a blending process

  • 3811 21 00 73

    Additives containing: - borated succinimide compounds (CAS RN 134758-95-5), - mineral oils, and - having a total base number (TBN) greater than 40, for use in the manufacture of additive mixtures for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 75

    Additives containing: - Calcium (C10-C14) dialkylbenzenesulfonates, - more than 40 %, but not more than 60 % by weight of mineral oils, with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 77

    Antifoam additives consisting of: - a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and - more than 50 % but not more than 80 % by weight of mineral oils for use in the manufacture of additive blends for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 80

    Additives containing : - polyisobutylene aromatic polyamine succinimide, - more than 40 % but not more than 60 % by weight of mineral oils, with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 83

    Additives containing: - polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), - containing more than 31,9 % but not more than 43,3 % by weight of mineral oils, - not more than 0,05 % by weight chlorine, and - having a total base number (TBN) greater than 20, for use in the manufacture of additives blends for lubricating oils

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 85

    Additives, - containing more than 20 % but not more than 45 % by weight of mineral oils, - based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated, for use in the manufacture of blends of additives

    5.3%

    Duty suspension: 0% under an end-use authorisation

    Conditions apply, customs authorisation needed.

  • 3811 21 00 90

    Other

A suspension is a lower rate the EU grants for specific products; whether your goods qualify depends on the line's wording and conditions.

Exports from the EU and Intrastat normally use the 8-digit code as it is.

EU tariff data of Sept. 13, 2026.

Rates, origin and documents

Read the signals first. Open only the ones you want to check.

Besides the ordinary duty, the EU records these kinds of measure against this code. They are listed as signals only: whether one applies to your goods can depend on where they come from, who produced them, the exact product and the documents you present. No amounts are worked out here.

Data of Sept. 1, 2026

Lower duty for goods from some countries

Possible

Preferential rates exist for goods originating in:

  • San Marino
  • Comoros (excluding Mayotte), Madagascar, Mauritius, Seychelles and dependencies and Zimbabwe
  • Botswana, Eswatini, Lesotho, Mozambique and Namibia
  • Ivory Coast
  • Cameroon
  • Fiji
  • United Kingdom
  • Ghana
  • +46 origins

These rates apply to Economic Partnership Agreements; CARIFORUM except Haiti; GSP-EBA (Special arrangement for the least-developed countries - Everything But Arms); OCTs (Overseas Countries and Territories); GSP - General arrangements; GSP+ (incentive arrangement for sustainable development and good governance).

Whether you can use one depends on the origin rules for the goods and on the documentation you can show.

Check this code in the official EU TARIC database

Restrictions and paperwork

Important

Import restrictions are recorded for goods originating in:

  • Ukraine
  • Belarus
  • Russian Federation
  • any country

The EU records document conditions on this code. What customs may ask for depends on where the goods come from, exactly what the product is and the customs procedure.

Proof of origin 2 conditions

If you claim a lower rate for goods from a country the EU has a trade agreement with, customs asks for proof of origin, for example a EUR.1 certificate or an origin declaration.

Show the EU's own wording for these conditions
  • Invoice declaration or origin declaration made out by any exporter on invoice or any other commercial document
  • Movement certificate EUR.1

Sanctions and restricted regions 10 conditions

Some conditions come from EU sanctions rules. They matter when the goods are linked to a country or region the EU restricts trade with.

Show the EU's own wording for these conditions
  • Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
  • Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
  • Import authorisation by virtue of article 1ra paragraph 10 of Council Regulation (EU) 765/2006
  • The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 4)
  • The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 3)
  • Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 8f of Regulation (EU) No 765/2006)
  • Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
  • The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3aa)
  • Import authorisation by virtue of article 3i paragraph 3c of Council Regulation (EU) 833/2014
  • Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014

Product controls and permits 3 conditions

Depending on the exact product, customs may ask for a licence, a permit or a control certificate before the goods are released.

Show the EU's own wording for these conditions
  • Compliance with the REACH restrictions defined in Column 2 of Annex XVII of Regulation (EC) No 1907/2006
  • Exemption from REACH restrictions by virtue of Article 67(1) and 67(2) of Regulation (EC) No 1907/2006
  • Substance/mixture not subjected to the provisions of Regulation (EC) No 1907/2006 (Annex XVII)
Check this code in the official EU TARIC database

EU tariff measure data of Sept. 1, 2026.

One last classification check

Check the path and the nearest alternatives.

Use this view if you are still unsure the code describes the product precisely.

How we got to this code

  1. VI
  2. 38
  3. 3811
  4. 3811 21
  5. 3811 21 00
Show the steps

Subheading 3811 21 has only this one 8-digit code, so there is no neighbour to compare with.

Duty rates shown here are estimates, read from official EU / Danish, Norwegian and UK tariff data for orientation only. Confirm the current rate with Toldstyrelsen, TARIC, Norwegian Customs or the UK Online Trade Tariff before you file. The rate you pay can also depend on the country of origin. These are base customs duties only: import VAT, excise duties, anti-dumping duties and safeguard or quota measures are not included.